Owner's Manual

ULTRA FLANGER UF300

2-Mode Flanger Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA FLANGER UF300.

This high-quality eects pedal delivers two angers in one—from jet-plane thick chorus, vibrato to

short delay eects. Thanks to its high-performance features you can choose between classic and detuned

anger eects with extensive parameter controls for awesome sound shaping.

Originally, the anger eect was generated with two tape recorders running synchronously. The same audio

signal was recorded on both machines. If you put a nger on the left spool of one of the machines, the spool

and the playback speed are slowed down. The generated delay results in phase shifting of the signals.

1. Controls

(1) The MODE switch lets you choose between negative feedback (Mode 1) or positive feedback

(Mode 2) anger modes. Negative feedback means that the delayed signal is inverted before it is

fed back to the original signal. In positive feedback mode the delayed signal is not inverted. In this

case the eect has a more detuned character perfect for vibrato eects.

(2) With the MANUAL control you can adjust the anger delay time. Longer delay times produce a

sharper, more detuned sound, very close to a chorus eect.

(3) Turn up the DEPTH control to achieve a fuller and deeper eect sound.

(4) The RATE control determines the speed of the anger eect.

(5) The RES(onance) control determines the amount of output signal fed back to the anger input to

increase the resonance frequency. That way the anger eect gets more intensive.

(6) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.

(7) Use the footswitch to activate/deactivate the eect.

(8) Use this ¼" TS IN connector to plug in the instrument cable.

(9) The ¼" TS OUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).

(1)

(2)

(9)

(6)

(7)

(4)

(3)

(5)

(8)

PAGE 1
ULTRA FLANGER UF300 2-Mode Flanger Effects Pedal Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA FLANGER UF300. This high-quality effects pedal delivers two flangers in one—from jet-plane thick chorus, vibrato to short delay effects. Thanks to its high-performance features you can choose between classic and detuned flanger effects with extensive parameter controls for awesome sound shaping.
PAGE 2
ULTRA FLANGER UF300 The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit. ◊ The UF300 has no on/off switch. As soon as you insert the jack into the in connector, the UF300 begins running. When not using the UF300, remove the jack from the in connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom. 2.
PAGE 3
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION ULTRA FLANGER UF300 Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone Number: Phone: +1 425 672 0816 ULTRA FLANGER UF300 complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.