EURORACK® UB1622FX-PRO UB1832FX-PRO UB2222FX-PRO UB2442FX-PRO Version 1.2 July 2002 www.behringer.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the device is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO TABLE OF CONTENTS 1. INTRODUCTION ......................................................................................................... 4 1.1 General mixing console functions .................................................................................................................... 4 1.2 The users manual ..................................................................................................................................
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO FOREWORD 1. INTRODUCTION Dear Customer, Im sure youre one of those people who have devoted themselves body and soul to your chosen area and no doubt this has transformed you into an expert in your field! Well, for over 30 years, my passion has been music and electronics. This not only led me to establish BEHRINGER, but also enabled me to convey and share my enthusiasm with my employees.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 1.2 The users manual The users manual is designed to give you both an overview of the controls, as well as detailed information on how to use them. In order to help you understand the links between the controls, we have arranged them in groups according to their function. If you need to know more about specific issues, please visit our website at http://www.behringer.com, where youll find explanations of e.g. effects and dynamics applications.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO The two most common operating levels (+4 dBu and -10 dBV) are highlighted for quick and accurate level setting. LO CUT Additionally, the mono channels of the mixing consoles have a high-slope LO CUT filter for eliminating unwanted, low-frequency signal components (75 Hz, 18 dB/octave). 2.1.2 Equalizer All mono input channels have a 3-band equalizer with semiparametric mid bands. All bands provide boost or cut of up to 15 dB.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO SOLO The SOLO switch is used to route the channel signal to the solo bus (Solo In Place) or to the PFL bus (Pre Fader Listen). This enables you to listen to a channel signal without affecting the main output signal. The signal you hear is taken either before the pan control (PFL, mono) or after the pan and channel fader (Solo, stereo) (cf. chap. 2.3.10 Level meters and monitoring).
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO AUX SEND 1, 2 and 4 The AUX SEND 1 control governs the master send level of the mix created by the individual channel AUX 1 sends. Likewise, the AUX SEND 2 contol is the master control for the aux 2 bus, and AUX SEND 4 controls the AUX 4 bus. AUX SEND 3 (FX) The FX control determines the signal level for effects processing, i.e. regulates the level to an external (or the internal) effects device.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO MUTE Press the MUTE switch to mute the monitor send. SOLO The SOLO switch routes the monitor send to the solo bus (post-fader and post-mute) or to the PFL bus (pre-fader and pre-mute). The position of the MODE switch in the main section determines which of the buses is selected. ([WHUQDO HIIHFWV GHYLFH UHFHLYHV VLJQDO IURP AUX SEND STEREO AUX RETURN connectors 8% ); 352 2.3.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO + If you connect a compressor or a noise gate post 2-track output, the main mix fader will probably not be able to create a satisfactory fade-out effect. 2.3.9 Lamp socket (UB2442FX-PRO only) Use this BNC socket to connect a gooseneck lamp (12 V DC, max. 0.5 A). 2.3.10 Level meter and monitoring Fig. 2.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO LEVEL SETTING: When recording to digital recorders, the recorders meter should not go into overload. This is because, unlike analog recordings, it takes only slightly excessive levels to create unpleasant digital distortion. When recording to analog, the VU meters of the recording machine should reach approx. +3 dB with low-frequency signals (e.g. kick drum).
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 4. DIGITAL EFFECTS PROCESSOR 99 ORIGINAL VIRTUALIZER® PRESETS Here is an overview of all of the multi-effects processors presets. This effects module gives you various standard effects, such as reverb, chorus, flanger, delay, pitch shifter and various combination effects that have already shown what they can do in our 19" effects processor, the VIRTUALIZER PRO DSP2024P.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO PHANTOM switch The PHANTOM switch activates the phantom power (necessary to operate condenser microphones) on the XLR sockets of the mono channels. The red +48 V LED illuminates when phantom power is on. As a rule, dynamic microphones can still be used with phantom power, provided that they are wired in a balanced configuration. In case of doubt, contact the microphone manufacturer! 5.3 Inserts + While Fig. 5.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 6. INSTALLATION 6.1 Rack mounting The packaging of your mixing console contains two 19" rack mounts for installation on the side panels of the console. Before you can attach the rack mounts to the mixing console, you need to remove the screws holding the left and right side panels. Then, use these screws to fasten the two rack mounts, each specifically to one side.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO Main outputs Type 7. SPECIFICATIONS Microphone inputs (IMP Invisible Mic Preamp) Type XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 135.7 dB A-weighted @ 50 Ω source resistance -131 dB / 133.3 dB A-weighted @ 150 Ω source resistance -129 dB / 130.5 dB A-weighted Frequency response <10 Hz - 150 kHz (-1 dB), <10 Hz - 200 kHz (-3 dB) Gain range Max.
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 8. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
