User's Manual

Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA SHIFTER/HARMONIST US600.
This high-quality eects pedal shifts single notes and chords and even creates intelligent harmonies to your notes—
at the touch of a footswitch. Take o with incredible Tremolo Arm/Flutter eects to bend single notes or simulate the
movement of the tremolo bar.
1. Controls
(1) The D TIME/SPEED control has 2 dierent
functions depending on the eect mode
selected. For TREM BAR and FLUTTER mode
it adjusts the speed of the pitch change.
When using DETUNE mode it controls the
delay time of the eect. In PITCH SHIFTER and
HARMONIST mode this control is not active.
(2) The BALANCE control adjusts the balance
between the direct signal and the eect signal
in PITCH SHIFTER, DETUNE and HARMONIST
mode. At minimum position only the direct
signal is provided while at maximum
position only the eect signal will be heard.
In TREM BAR and FLUTTER modes this control
adjusts the output level of the eects pedal.
(3) The HR KEY control is used in HARMONIST mode
to determine the key you are playing in.
Thisassures that the right notes tting with the
harmonic preconditions are generated by the
eect. You can select out of 10 dierent keys:
(4) The PITCH control adjusts the amount of pitch shifting. In HARMONIST mode it selects the interval
added to the direct signal.
(5) Use the MODE control to select one of 5 dierent eect styles.
PITCH SHIFTER: Adds a detuned signal to the original signal with a maximum of 2 octaves above or below.
Use the PITCH control to select the degree of pitch shift (-24, -12, -7, -5, -2, -1, +3, +4, +5, +7, +12, +24).
HARMONIST: Adds harmonies to the original signal with a maximum of 2 octaves above or below. Use the
PITCH control to select the desired interval (-2 Oct, -1 Oct, -6th, -5th, -4th, -3rd, +3rd, +4th, +5th, +6th, +1 Oct,
+2Oct). The intervals are dynamic and adapt to the key determined with the HR KEY control.
DETUNE: Adds a subtle detuned signal to the original signal with a maximum of 30 cents above or below
(-30 C, -25 C, -20 C, -15 C, -10 C, -5 C, +5 C, +10 C, +15 C, +20 C, +25, +30 C). Use the PITCH control to adjust the
amount of detuning and the D TIME/SPEED control to determine the delay time.
TREM BAR: Detunes the input signal with a maximum of 2 octaves above or below similar to the eect created
with a guitar vibrato arm. Use the PITCH control to adjust the amount of detuning (-12, -5, -4, -3, -2, -1, +1, +2,
+3, +4, +5, +12) and the D TIME/SPEED control to determine the time used to reach the dened pitch value.
The eect is only active when you keep the footswitch depressed.
FLUTTER: Detunes the input signal periodically with a maximum of 1 octave above or below similar to the
eect created with a fast moving guitar vibrato arm. Use the PITCH control to adjust the amount of detuning
(-12, -5, -4, -3, -2, -1, +1, +2, +3, +4, +5, +12) and the D TIME/SPEED control to determine the time used to
reach the dened pitch value. The eect is only active when you keep the footswitch depressed.
(6) The ON/BATT LED illuminates when the eect is activated.
(7) Use the footswitch to activate/deactivate the eect.
(8) Use this ¼" TS IN connector to plug in the instrument cable.
1. C major (A minor)
2. G major (E minor)
3. D major (B minor)
4. A major (F# minor)
5. E major (C# minor)
6. B major (G# minor)
7. Gb major (D# minor)
8. Db major (Bb minor)
9. Ab major (Fm minor)
10. Eb major (C minor)
11. Bb major (G minor)
12. F major (D minor)
(2)
(1)
(5)
(6)
(8)
(10)
(7)
(3)
(4)
(9)
ULTRA SHIFTER/HARMONIST US600
Ultimate Pitch Shifter / Harmonist Eects Pedal