User Manual ULTRABASS BB410 High-Performance 1,200-Watt Bass Cabinet with Original 4 x 10'' BUGERA Speakers and 1'' Horn Driver
ULTRABASS BB410 User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 Shipment................................................................................. 5 1.2 Initial operation................................
ULTRABASS BB410 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
ULTRABASS BB410 User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
ULTRABASS BB410 User Manual 1. Introduction 2. Control Elements and Connections Thank you for expressing your confidence in our products by purchasing the BEHRINGER ULTRABASS BB410. This cabinet is built with the outstanding BUGERA bass speakers. The speaker cones are made of special high-quality paper that provide rich bass tone and clear middle frequencies.
ULTRABASS BB410 User Manual 3. Applications With a variety of connectors and the option to combine your BB410 with other BEHRINGER equipment, there is a large number of possible applications for your ULTRABASS. The following illustrations show a few of those. Output ULTRABASS BX3000T Input Active/Passive Input ULTRABASS BB410 Fig. 3.1: Mono setup with the ULTRABASS BX3000T This illustration shows a simple setup with the BEHRINGER ULTRABASS BX3000T bass amplifier.
ULTRABASS BB410 User Manual ULTRABASS BB210 Output R Output L L (Low) R (High/Mid) BASS V-AMP PRO EP2000 Instrument In Line Out L/R BASS V-AMP ULTRABASS BB115 Fig. 3.3: Bi-amping: high and low frequencies are separately reproduced by the bass cabinets When using the BASS V-AMP or the BASS V-AMP PRO, you also have the option of using bass cabinets in the bi-amping mode.
ULTRABASS BB410 User Manual If four or more speakers/cabinets need to be connected, this can be done using a serial parallel connection. With four speakers with an impedance value of 4 Ohms each, the resulting overall impedance does not change. Unbalanced ¼" TS connector strain relief clamp sleeve ◊ Whenever possible, try to use thick and short speaker cables to minimize power loss. Don’t lay output cables near input cables.
We Hear You
