Version 1.
ULTRABASS BX3000T SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the appliance is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section).
ULTRABASS BX3000T ULTRABASS 300-Watt bass amplifier with DYNAMIZER technology V Patented DYNAMIZER technology for ultimate punch BX3000T V Extremely powerful 300-Watt RMS bass amp head V Switchable ULTRABASS sub-harmonics processor for unbelievable low-end power V Revolutionary SHAPE filter for extreme sound range V Extremely musical 5-band EQ with “Bright” and “Deep” functions for ultimate tone-shaping V Integrated limiter and active, temperature-controlled cooling system for ultimate protection V
ULTRABASS BX3000T FOREWORD TABLE OF CONTENTS Dear Customer, Welcome to the team of ULTRABASS users and thank you very much for expressing your confidence in BEHRINGER products by purchasing the BEHRINGER BX3000T.
ULTRABASS BX3000T signal peaks can therefore be seen as one of its most essential quality features. 1. INTRODUCTION Congratulations! With the BX3000T you have acquired a prolevel amplifier from our BX bass amplifier series. This revolutionary bass amplifier top has many of the features of our successful BX1200. Our top goal when designing the BX3000T was to set new standards.
ULTRABASS BX3000T 2. CONTROL ELEMENTS 2.1 Front panel Fig. 2.1: BX3000T front panel (section 1) The LEVEL VU meter reads the level that is applied to the preamp circuitry of the BX3000T. If the GAIN control is set fully counterclockwise, the VU meter reads the input level only. Selecting instead of “Passive” is recommended “Active” if the input level appears too high (in the right-hand third of the VU meter). Use the GAIN control to set the amplifier properly (so that the meter is in the mid region).
ULTRABASS BX3000T 2.2 Rear panel 3.
ULTRABASS BX3000T If you own a tuner that is able to loop through and mute the signal, we recommend connecting it to and . This allows you to the effects loop mute the output signal as long as you tune your instrument. 3.3 Connecting several loudspeakers Needless to say, you can connect several loudspeakers (three at the most) to the speaker outputs of your BX3000T, which are wired in parallel. The figure below illustrates an example for such a connection. 8 4.
ULTRABASS BX3000T 5. ULTRABASS FUNCTION Extremely low bass sounds playing one octave below the lowest available bass guitar frequency are quite trendy in current music productions. Often, you can do this in studios only, because most bass amplifiers have no sub-harmonics function. Not so with your BX3000T: the ULTRABASS processor gives you the ultimate tool to shape up-to-date sounds. You’ll be surprised how deep your bass can sound with the ULTRABASS function of your BX3000T.
ULTRABASS BX3000T 7. SPECIFICATIONS AUDIO INPUTS Active instrument input Input impedance Passive instrument input Input impedance Return Input impedance 1/4" mono jack, unbalanced approx. 220 kΩ unbalanced 1/4" mono jack, unbalanced approx. 750 kΩ unbalanced 1/4" mono jack, unbalanced approx. 10 kΩ unbalanced AUDIO OUTPUTS Send/Tuner Output impedance Line Out Output impedance Output level D.I. output Output impedance Output level Loudspeaker connectors Load impedance 1/4" mono jack, unbalanced min. 2.
ULTRABASS BX3000T 8. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
