Version 1.
ULTRABASS BX3000T IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
ULTRABASS BX3000T ULTRABASS 300-Watt bass amplifier with DYNAMIZER technology s Patented* DYNAMIZER technology for ultimate punch BX3000T s Extremely powerful 300-Watt RMS bass amp head s Switchable ULTRABASS sub-harmonics processor for unbelievable low-end power s Revolutionary SHAPE filter for extreme sound range s Extremely musical 5-band EQ with Bright and Deep functions for ultimate tone-shaping s Integrated limiter and active, temperature-controlled cooling system for ultimate protection s
ULTRABASS BX3000T FOREWORD Dear Customer, Welcome to the team of ULTRABASS users and thank you very much for expressing your confidence in BEHRINGER products by purchasing the BEHRINGER BX3000T.
ULTRABASS BX3000T signal peaks can therefore be seen as one of its most essential quality features. 1. INTRODUCTION Congratulations! With the BX3000T you have acquired a prolevel amplifier from our BX bass amplifier series. This revolutionary bass amplifier top has many of the features of our successful BX1200. Our top goal when designing the BX3000T was to set new standards.
ULTRABASS BX3000T 2. CONTROL ELEMENTS The BASS control in the EQ section allows you to boost or cut the bass frequencies at approx. 50 Hz. 2.1 Front panel Press the DEEP switch to add low frequencies (ranging from 30 - 200 Hz) to your bass sound. When the DEEP function is switched on, the LED above the switch lights up. This control governs the upper bass-frequency range at approx. 140 Hz. The MIDDLE control allows you to boost/cut the low midrange frequencies at approx. 500 Hz.
+ 2.2 Rear panel ULTRABASS BX3000T For correct speaker connection please also refer to chapters 3.3, 3.3.1 and 6.2.1! 3. WIRING EXAMPLES This chapter is aimed at describing and illustrating basic wiring examples. 3.1 Standard setup comprising footswitch and one loudspeaker The standard setup is intended for rehearsals, sessions and club gigs. Fig. 2.4: BX3000T rear panel (section 1) Use the POWER switch to switch the BX3000T on or off.
ULTRABASS BX3000T + + The D.I. output signal of your BX3000T is independent of the OUTPUT controls setting. However, it depends on all remaining settings and the effects loop. If you own a tuner that is able to loop through and mute the signal, we recommend connecting it to and . This allows you to the effects loop mute the output signal as long as you tune your instrument. 3.
ULTRABASS BX3000T 5. ULTRABASS FUNCTION Extremely low bass sounds playing one octave below the lowest available bass guitar frequency are quite trendy in current music productions. Often, you can do this in studios only, because most bass amplifiers have no sub-harmonics function. Not so with your BX3000T: the ULTRABASS processor gives you the ultimate tool to shape up-to-date sounds. Youll be surprised how deep your bass can sound with the ULTRABASS function of your BX3000T.
ULTRABASS BX3000T 7. SPECIFICATIONS AUDIO INPUTS Active instrument input Input impedance Passive instrument input Input impedance Return Input impedance 1/4" mono jack, unbalanced approx. 220 kΩ unbalanced 1/4" mono jack, unbalanced approx. 750 kΩ unbalanced 1/4" mono jack, unbalanced approx. 10 kΩ unbalanced AUDIO OUTPUTS Send/Tuner Output impedance Line Out Output impedance Output level D.I. output Output impedance Output level Loudspeaker connectors Load impedance 1/4" mono jack, unbalanced min. 2.
ULTRABASS BX3000T 8. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
