BX4210A/BX4210 ULTRABASS Users manual Version 1.
ULTRABASS BX4210A/BX4210 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
ULTRABASS BX4210A/BX4210 TABLE OF CONTENTS FOREWORD Dear Customer, Welcome to the team of ULTRABASS users and thank you very much for expressing your confidence in BEHRINGER products by purchasing the BEHRINGER BX4210A/BX4210. 1. INTRODUCTION .........................................................
ULTRABASS BX4210A/BX4210 1.1.1 Patented Dynamizer technology 1. INTRODUCTION Congratulations! With the BX4210A/BX4210 you have acquired a pro-level amplifier from our BX bass amplifier series. This revolutionary bass amplifier has many of the features of our successful BX1200. Our top goal when designing the BX4210A/ BX4210 was to set new standards. In fact, the BX4210A/BX4210 is a bass amp that gives you a full set of features plus a comprehensive range of connection and expansion options.
ULTRABASS BX4210A/BX4210 1.2.3 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased.
ULTRABASS BX4210A/BX4210 + When the built-in limiter is activated, the LED below the OUTPUT control lights up. Connect the SEND/TUNER output to the input of your effects device, for example, our proven multi-effects processor BEHRINGER VIRTUALIZER PRO DSP2024P. This output can also be used to connect your tuner. Connect the RETURN jack to the output of your effects device. Since the BX4210A/BX4210 features a serial effects path, the mix ratio must be set on your effects device. Use the balanced D.I.
ULTRABASS BX4210A/BX4210 3.2 Expanded setup with tuner and connection to a mixing console The wiring scheme shown here builds on the standard setup. 3.3.1 Calculating the total impedance when connecting several loudspeakers If several speakers are used in parallel, their total impedance can be calculated as follows: E.g. this would allow two 8 W loudspeakers ... ... or 1 x 8 W and 2 x 16 W: Fig. 3.2: Expanded setup The output signal of your BX4210A/BX4210 can be taken directly at the XLR D.I.
ULTRABASS BX4210A/BX4210 4. SHAPE FUNCTION 6. INSTALLATION The SHAPE function on your BX4210A/BX4210 provides a revolutionary type of filter that you can use to modify your bass sound in full detail. The filter allows you to shape your sound which is a must for bass players today. Extreme filter settings will give your bass sound more power, for example: 6.1 Mains connection You want to play a live bass solo but the sound doesnt cut through. The solo should stand out, rather than being drowned.
+ ULTRABASS BX4210A/BX4210 Please ensure that only qualified personnel install and operate the BX4210A/BX4210. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the unit. 6.2.1 Loudspeaker connections In total, your BX4210A/BX4210 features three loudspeaker connectors. + When connecting loudspeakers to the 1/4" jack connectors, please switch off the device first.
ULTRABASS BX4210A/BX4210 8. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law.