ULTRAPAR Version 1.
ULTRAPAR UP1000 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, disconnect the spotlight from the mains before cleaning or servicing the unit. No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electrical shock, do not expose the spotlight to rain or moisture. DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions.
ULTRAPAR UP1000 ULTRAPAR Professional Die-Cast PAR Spotlight UP1000 s Extremely high luminous efficiency with low power consumption s Ideally suited for BEHRINGER 575H lamp or compatible models with G9.
ULTRAPAR UP1000 1. INTRODUCTION Congratulations! With the BEHRINGER ULTRAPAR UP1000 you purchased a first-class PAR spotlight mounted in a compact, extremely robust and durable casing and featuring a comprehensive range of accessories. 1.1 Before you begin Your ULTRAPAR was carefully packed in the factory and the packaging is designed to protect the unit from rough handling.
ULTRAPAR UP1000 2.1 Disassembling the lamp casing / installing a lamp Lamps that have been damaged, must be replaced immediately! Please proceed as follows to replace the lamp: + The lamp gets very hot during operation of the spotlight, so let it cool down sufficiently before you attempt to dismount it! s Disconnect the spotlight from the mains power supply, and unscrew the thumb screw on the rear of the lamp casing (G 9.5 socket).
ULTRAPAR UP1000 3.1 + Dismounting the lens The lens gets very hot during operation of the spotlight, so let it cool down sufficiently before you attempt to dismount it! s Disconnect the spotlight from the mains and wait until it has cooled down. s Place the spotlight on a flat and stable surface. Never mount or dismount the lens, while the spotlight is fixed to a truss or stand. s Remove the protective mesh : press its two spring shackles, then pull out the mesh.
ULTRAPAR UP1000 5. CLEANING THE REFLECTOR s Disconnect the spotlight from the mains and remove the lamp casing as described in chapter 2.1. s Remove the color frame (chapter 4), the protective mesh and lens the reflector is easily accessible. (chapter 3.1), so that s Cleaning the reflector: Use oil-free compressed air or a soft, lint-free cotton cloth.
ULTRAPAR UP1000 8. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
