Manual, Multingual

ULTRA OCTAVER UO300
3-Mode Octaver Eects Pedal
Thank you for showing your condence in us by purchasing the
Behringer ULTRA OCTAVER UO300. This high-quality eects pedal
creates a monster sound by adding two additional tones using your
guitar—one and two octaves below the original tone. Thanks to its
high-performance features you’ll get natural, clear octave sounds with
constant pitch, even for staccato playing.
Octave eect is possible due to a circuitry that generates signals one or
more octaves below the input signal.
1. Controls
(1) The RANGE selector allows you to optimize the eects pedal
for HIGH, MID and LOW frequencies and use instruments with
dierent frequency ranges (guitar, bass guitar, keyboard, etc.)
(2) The DIRECT control adjusts the level of the original input signal.
(3) The OCT 1 control adjusts the level of the generated signal one
octave below the original signal.
(4) The OCT 2 control adjusts the level of the generated signal two
octaves below the original signal.
(5) The blue ON/BATT LED illuminates when the eect is activated.
Italso serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS IN connector to plug in the instrument cable.
(8) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power
supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
V1.0
(5)
(1)
(7)
(4)
(6)
(3)(2)
(8)