GM110 V-TONE User’s Manual Version 1.
V-TONE GM110 IMPORTANT SAFETY PRECAUTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
V-TONE GM110 V-TONE True Analog Modeling 30-Watt Guitar Amp with 10" BUGERA™ Speaker V Original heavy-duty 10" BUGERA™ guitar speaker for classic sound GM110 V Powerful 30-Watt guitar workstation with authentic V-TONE analog modelling V Authentic V-TONE analog modeling for 3 classic guitar amps, 3 speaker simulation models plus 3 gain modes—providing you with 27 modeled sounds V Clean channel and full-featured modeling channel offering everything you need from clean to crunch to super-fat distortion s
V-TONE GM110 TABLE OF CONTENTS FOREWORD Dear Customer, welcome to the team of BEHRINGER users, and thank you very much for expressing your confidence in us by purchasing the BEHRINGER V-TONE.
V-TONE GM110 1.3.2 Initial operation 1.1 The design concept The philosophy behind BEHRINGER products guarantees a no-compromise circuit design and employs the best choice of components. The operational amplifiers employed by BEHRINGER and used in the V-TONE GM110 are exceptional: they boast extreme linearity and very low distortion characteristics.
V-TONE GM110 2. CONTROL ELEMENTS 2.1 Front panel Fig. 2.1: Front panel control elements INPUT is the GM110’s 1/4" jack input for your guitar. Use a commercial 1/4" jack mono cable (not from a DIY shop, but from a specialist music dealer). The SPEAKER switch provides you with simulations of two classic guitar loudspeakers: 4x12"-loudspeakers in a closed back enclosure (U.K.), and 2x12" loudspeakers, open back (U.S.).
V-TONE GM110 SERIAL NUMBER. At the D.I. OUT output (balanced XLR socket), you can tap the audio signal of the V-TONE GM110 in order, for example, to feed it into a mixing console and record it. This audio signal is frequency-corrected (Speaker Simulation). The level of the D.I. OUT (max. +22 dBu) is designed to provide simple connection to mixers or other audio devices. You can use the SPEAKER socket to connect an additional loudspeaker to your V-TONE GM110.
V-TONE GM110 4.1 Loudspeaker connection 4. AUDIO CONNECTIONS The BEHRINGER V-TONE GM110 is fitted with audio inputs and outputs in the form of 1/4" mono jacks. The exceptions to this are the headphones output and the D.I. OUT. Please ensure that only qualified personnel install and operate the device. Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor of the unit or of the AC power cable.
V-TONE GM110 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. 2.
