User Manual VIRTUBE VT250 2 x 50-Watt Guitar Amplifier with 2 Independent Channels, VTC Tube Modeling, Dual FX and 2 Original BUGERA 12" Speakers VT100 /VT50 100/60-Watt Guitar Amplifier with 2 Independent Channels, VTC Tube Modeling, Dual FX and Original BUGERA 12" Speaker VT100 H 100-Watt Guitar Amplifier Head with 2 Independent Channels, VTC Tube Modeling and Dual FX
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. Introduction................................................................ 4 1.1 Before you get started..............
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual 1. Introduction The demands placed on a guitar amp are nowadays very broad. A guitarist should offer a wide array of sounds. That’s why it is very important to us to be able to offer you maximum sound diversity as well as a variety of connection possibilities with your VIRTUBE. Don’t worry: you will quickly master the VIRTUBE and learn how to use all of its capabilities easily and intuitively.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual 2.1.4 MASTER section (13) With the MIDDLE control (VT100FXH and VT100FX only) you can raise or lower the midrange frequencies on the OVERDRIVE channel. (14) The TREBLE control adjusts the treble frequencies on the OVERDRIVE channel. (15) Use the CONTOUR control for additional, highly characteristic adjustment of the midrange, allowing you to easily create traditional as well as ultra-modern guitar sounds.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual (33) Connect the FX RETURN jack to the output of the external effects device. The VT250FX has two jacks (L/R) because it is a stereo amplifier. (34) Use the FOOTSWITCH jack to connect the 1/4" TRS plug of the footswitch supplied with the unit. The footswitch performs a dual function: it switches between the two channels and turns the DIGITAL FX on and off. (35) SERIAL NUMBER. 3.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual 3.3 Live set-up with external speaker box BG412S Mixing Console 3.4 Wiring the VT100FXH The VT100FXH has two SPEAKER OUT outputs for connection of one or two external speaker cabinets. To achieve maximum power output on the VT100FXH, both speaker outputs should be connected to speaker cabinets with a minimum impedance of 4 Ω. Connecting headphones to the PHONES jack will automatically mute the speaker outputs.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual 4. Installation R Except for the headphones output and the CD IN input (1/4" TRS connectors), all audio inputs and outputs on the BEHRINGER VIRTUBE are on 1/4" TS connectors. Please see Chapter 5, “Specifications” for more information. ◊ Please ensure that the unit is installed and operated only by people qualified to do so. During installation and operation the user must have sufficient electrical contact to earth.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual 5. Specifications VT250FX Audio Inputs Power Supply Input 1/4" TS, RF filtered Input impedance approx. 1 MΩ, unbalanced FX Return 2 x 1/4" TS 100 V~, 50/60 Hz T 3.15 A H 250 V Input impedance approx. 33 kΩ, unbalanced 120 V~, 50/60 Hz T 2.5 A H 250 V CD In 1/4" TRS 220 - 230 V~, 50/60 Hz T 1.25 A H 250 V Input impedance approx. 5.6 kΩ, unbalanced Mains connection Standard IEC receptacle Audio Outputs max.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual VT100FX Audio Inputs Power Supply Input 1/4" TS, RF filtered Input impedance approx. 1 MΩ, unbalanced FX Return 1/4" TS 100 V~, 50/60 Hz T 2.5 A H 250 V Input impedance approx. 33 kΩ, unbalanced 120 V~, 50/60 Hz T 2.5 A H 250 V CD In 1/4" TRS 220 - 230 V~, 50/60 Hz T 1.0 A H 250 V Input impedance approx. 5.6 kΩ, unbalanced Mains connection Standard IEC receptacle Audio Outputs max.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual VT50FX Audio Inputs Power Supply Input 1/4" TS, RF filtered Input impedance approx. 1 MΩ, unbalanced FX Return 1/4" TS 100 V~, 50/60 Hz T 1.6 A H 250 V Input impedance approx. 33 kΩ, unbalanced 120 V~, 50/60 Hz T 1.25 A H 250 V CD In 1/4" TRS 220 - 230 V~, 50/60 Hz T 630 mA H 250 V Input impedance approx. 5.6 kΩ, unbalanced Mains connection Standard IEC receptacle Audio Outputs max.
VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual VT100FXH Audio Inputs Power Supply Input 1/4" TS, RF filtered Input impedance approx. 1 MΩ, unbalanced FX Return 1/4" TS 100 V~, 50/60 Hz T 2.5 A H 250 V Input impedance approx. 33 kΩ, unbalanced 120 V~, 50/60 Hz T 2.5 A H 250 V CD In 1/4" TRS 220 - 230 V~, 50/60 Hz T 1.0 A H 250 V Input impedance approx. 5.6 kΩ, unbalanced Mains connection Standard IEC receptacle Audio Outputs max.
We Hear You