WING DAW-CONTROL V 1.
WING DAW-CONTROL Table of Contents DAW-Setup....................................................................... 3 Settings WING............................................................................... 3 Settings DAW................................................................................ 3 CUBASE/NUENDO..................................................................... 4 ABLETON LIVE............................................................................ 5 LOGIC...................
WING DAW-CONTROL DAW-Setup The WING console uses the commonly used Mackie MCU- and Mackie HUI-Protocol. These protocols are supported over a wide range of DAWs which allows for instant support. Nevertheless, the implementation is dependent on a predefined transmission protocol and the scope of possibilities is limited. For DAW remote control there are settings to be made on both, the hardware and software side. Settings WING To enter the DAW-Setup navigate to SETUP DAW.
WING DAW-CONTROL CUBASE/NUENDO *Music Tribe recommends Mackie MCU for the use with Cubase/Nuendo 1. Navigate to Studio Studio Setup 2. Select the Folder Remote Devices and add device (+) 3. Select Mackie Control from the dropdown 4. If you want to use the complete surface set up 3 devices in total IMPORTANT: Cubase lists the devices from top to bottom and from right to left.
WING DAW-CONTROL ABLETON LIVE *Music Tribe recommends Mackie MCU for the use with Ableton Live 1. Navigate to Preferences Link Midi 2. Select Mackie Control for the first device from the dropdown 3. Assign WING (Port 1) as Input and Output 4. If you want to use the whole surface, please select Mackie ControlXT for second and third device from the dropdown 5. Assign WING (Port 2) & WING (Port3) as Input and Output 6.
WING DAW-CONTROL STUDIO ONE *Music Tribe recommends Mackie MCU for the use with Studio One 1. Navigate to Options External Device 2. Select Add… | Mackie | Control from the list 3. Choose WING MIDI DAW 1 under Receive From and Send To 4. Select Add… | Mackie | Control Extender from the list 5. Create two devices and choose WING MIDI DAW 2 & 3 under Receive From and Send To 6.
WING DAW-CONTROL REAPER *Music Tribe recommends Mackie MCU for the use with Reaper 1. Navigate to Options Preferences Control/OSC/web 2. Select Add | Mackie Control Universal 3. Choose WING MIDI DAW 1 under MIDI Input and MIDI Output 4. Select Add | Mackie Control Extender 5. Choose WING MIDI DAW 2 under MIDI Input and MIDI Output, set Surface offset (tracks) to 8. 6. Select Add | Mackie Control Extender 7. Choose WING MIDI DAW 3 under MIDI Input and MIDI Output, set Surface offset (tracks) to 16.
WING DAW-CONTROL PRO TOOLS *To use DAW-Control with Pro Tools please use Mackie HUI 1. Navigate to Setup Peripherals 2. Select the MIDI Controllers tab 3. Select HUI in #1 and assign WING (port 1) as Recieve From and Send To, set #Ch’s to 8 4. If you want to use the whole surface, please setup #2 and #3 for second and third device 5.
WING DAW-CONTROL Custom Control Section The SETUP DAW page provides an additional switch to include the upper part of the Custom Control Section. Since the usage of the upper CC-Section is ProtocolSpecific (MCU/HUI) further explanation can be found in the respective Chapters. Overview Use the DAW-Button to activate DAW-Control. Depending on the DAW the jog wheel and arrow keys can be used for navigation and zoom functionality.
WING DAW-CONTROL Store Preset As soon as the surface is adapted to ones needs, a preset can be stored. The DAW layers are part of the CC Section and can be saved within a snapshot providing a corresponding recall scope. To do so navigate to the Library and store a Snapshot. To limit the snapshot to the parameters of the CC Section, select CUSTOM in the recall scope only. Share Preset The presets provided on the Setup Page are intended to be a starting point for different DAWs.
WING DAW-CONTROL MCU – Implementation The MCU implementation offers support for up to 24 faders and is different from other protocols in terms of additional functions that can be accessed via the layer buttons and the upper part of the CC section.
WING DAW-CONTROL HUI- Implementation The HUI implementation offers support for up to 24 faders and is different from other protocols in terms of additional functions that can be accessed via the layer buttons and the upper part of the CC section.
We Hear You
