DAW Control

11 WING DAW-CONTROL
MCU – Implementation
The MCU implementation oers support for up to 24 faders and is dierent from other protocols in terms of additional functions that can be accessed via the layer
buttons and the upper part of the CC section.
Layer Buttons
The former layer buttons are assigned to virtual buttons of the original Mackie MCU-Hardware:
* Button of original Mackie MCU Hardware
Upper CC-Section
When using the MCU-Protocol, there are two modes for the upper portion of the CC-Section.
If the USER-Layers is selected in the lower portion it is completely customizable. If one of the DAW-Layers is selected the assignment is precongured with Push-
Encoder functions in blocks of 4:
LEFT MID RIGHT
VIEW ≈ NAME/VALUE* VIEW ≈ NAME/VALUE* VIEW ≈ NAME/VALUE*
CH1-12 ≈ TRACK* SOF FLIP ≈ FLIP* MAIN/MATRIX ≈ TRACK*
CH13-24 ≈ PAN* DCA ≈ PAN* DCA ≈ PAN*
CH25-40 ≈ SEND* MAIN/MATRIX ≈ SEND* CH1-40 ≈ SEND*
AUX/FX ≈ EQ* AUX/FX ≈ EQ* AUX/FX ≈ EQ*
BUS/MASTER ≈ PLUGIN* BUS/MASTER ≈ PLUGIN * BUS/MASTER ≈ PLUGIN *
USER1/USER2
[navigate faders in banks of 8]
USER1/USER2
[navigate faders in banks of 8]
USER1/USER2
[navigate faders in banks of 8]
<4 / 4>
[navigate faders by single channel]
<4 / 4>
[navigate faders by single channel]
<4 / 4>
[navigate faders by single channel]
This section is representing 4 channels of the
virtual hardware controller. There are two
ways to navigate channels:
1. SELECT a channel and the section jumps to
the corresponding 4CH-Goup
2. Navigate through channels in clocks of 4
using the UP- and DOWN-Button
The display is showing the information of
the corresponding 4 Channels
The encoder is used in conjunction with the
button underneath as the Push-Encoder of
the original hardware.
Upper-Button = Push-Function
The Lower-Buttons act as the Record-
Button of the corresponding channel