DAW Control

9 WING DAW-CONTROL
Custom Control Section
The SETUP  DAW page provides an additional switch to include the upper part of the Custom Control Section. Since the usage of the upper CC-Section is Protocol-
Specic (MCU/HUI) further explanation can be found in the respective Chapters.
Overview
Use the DAW-Button to activate DAW-Control. Depending on the DAW the jog wheel and arrow keys can be used for navigation and zoom functionality.
When in DAW-Mode, the buttons labeled “2-TRACK TRANP”, “MULTI TRANSP”, “MUTE GROUPS” and “SHOW CONTROL” correspond to four dedicated DAW CC-Layers.
All DAW layers can be freely assigned with functions, however we recommend using one of the presets for a quick start.
Assign Function to CC-Section
Assigning functionality to one of the four DAW layers works in the same way as for the general Custom Control Section. This means you can assign any command and
adopt the displayed name to your needs.
Use the VIEW-Button of the lower portion to enter the CC conguration screen. Select DAW BUTTONS or DAW V-POTS in the functions list and add MCU-Commands to
any control you like. Depending on the respective DAW function, please use the Edit-Name button to adjust the label in the display.
Beside casual surface buttons of the original hardware it is also possible to assign buttons to the CC-Section that are originally tied to a channel. Those functions are
indicated with square bracket. To activate the function the CC-Button and a button in the channel need to be pressed at the same time.
* Button of original Mackie HUI hardware
In addition to explicit DAW-Functions, console functions can be stored in the DAW-Layers as well. Depending on the selected protocol functions are greyed out on the
assign page and hidden on the CC LCDs.
Layer-Button for
CC-Layers in DAW-Mode
Open screen to assign functionality
to the CC-Layers in DAW-Mode
Timeline Navigation / Zoom ≈ Original
Activate DAW-
IMPORTANT:
The listed MCU Commands are the standard assignment of the original Mackie MCU Hardware unit. The name of the MCU command and the function in the
respective DAW do not necessarily match. To create your own presets for dierent DAWs, we recommend to lookup the function for dierent MCU commands in
the DAW you are using. For a quick start, please have a look at the translation table in the appendix. This document compares MCU commands to their function in
dierent DAWs.
*This list was NOT created in cooperation with the respective DAW manufacturers
(no warranty for correctness or completeness)
Name Type Protocol Function
Fadertouch [MUTE] LATCH MCU + HUI 1.Activate CC
2.Press MUTE of channel to activate fader touch (X32 like)
V-POT CTRL [SEL/SOLO] LATCH MCU + HUI 1.Activate CC
2.Hold SELECT and use jog wheel to turn virtual encoder
V-POT CTRL [SEL/SOLO] LATCH MCU + HUI 1.Activate CC
2.Press SOLO to push virtual encoder
RECRDY CTRL [SEL] PUSH MCU + HUI Press SELECT while holding CC to activate RECORD in channel
AUTO [SEL] PUSH HUI (only) Press SELECT while holding CC to press AUTO* in channel
V-SEL [SEL] PUSH HUI (only) Press SELECT while holding CC to press V-SEL* in channel
INS [SEL] PUSH HUI (only) Press SELECT while holding CC to press INS* in channel