ADJUST 1 2 3 4 GAIN / VOLUME NF I CO GUR ATION PEDAL PHONES EFFECT FX ONLY COPY ASS IGN SPEED AMP + FX STORE WAH TUNER 2ND FUNCTION PEDAL CONFIGURE BASS EQ NOISE G. TAP VOLUME PRESENCE COMPR. REVERB DELAY MODUL.
X V-AMP LX1-X User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. Introduction................................................................ 4 1.1 Before you get started....................................................... 4 2. Control Elements and Connectors............................
X V-AMP LX1-X User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
X V-AMP LX1-X User Manual 1. Introduction 2. Control Elements and Connectors The X V-AMP gives you extensive options to create an awesome stage show. The latest technology, simple and intuitive operation and robust construction result in optimal performance and dependability. In this chapter, we will describe different control elements of your X V-AMP. All controls and connectors will be explained in detail, and you will also get useful advice on how to use them.
X V-AMP LX1-X User Manual (15) (14) (19) (20) (21) (22) ADJUST 1 2 (1) 3 4 GAIN / VOLUME NF I CO GUR ATION PEDAL PHONES (2) EFFECT FX ONLY COPY WAH TUNER 2ND FUNCTION (18) PEDAL BASS EQ NOISE G. TAP VOLUME CONFIGURE (3) (13) ASS IGN SPEED AMP + FX STORE PRESENCE COMPR. REVERB DELAY MODUL. BYPASS/TUNER (4) (5) (6) (16) (7) (8) (9) (10) (11) (12) (17) Fig. 2.
X V-AMP LX1-X User Manual (9) DELAY. Pressing this key adjusts DELAY. A delay lets you create a lag in the input signal similar to an echo. Use ADJUST to regulate the intensity; when you keep TAP pressed while you turn ADJUST, you set up feedback. The rhythm in which you tap at the TAP key determines the time between individual echos. (10) PEDAL ASSIGN. Press DELAY (9) and REVERB (11) simultaneously to assign a function to the EXPRESSION PEDAL (“PA” is shown in the display).
X V-AMP LX1-X User Manual (22) AC IN. Connect the enclosed power supply to the AC IN connector. As soon as you plug the power supply into the mains, your X V-AMP is automatically “on”. More information on the power supply can be found in chapter 9 “Specifications”. Volume is adjustable globally by using the ADJUST control.
X V-AMP LX1-X User Manual 4. Presets 4.5 Restoring all factory presets Your X V-AMP features 100 user-rewritable presets (00 - 99). Each preset consists out of a maximum of 7 “ingredients”: Restoring all factory presets is done by keeping TAP + STORE depressed for longer than 2 seconds while you power up the X V-AMP. • amp simulation, • speaker simulation, • pre-amp effects (noise gate, compressor, Wah Wah), • adjustable presence and bass EQs, • modulation effect (e.g. phaser, chorus etc.
X V-AMP LX1-X User Manual BLACK TWIN: This simulation was modeled on a Fender Blackface Twin from 1965. In the ’60s this amp was used by jazz, country and even rock guitarists. What was unique about it was that it was exceptionally loud and was therefore mainly used for live performances. The secret of the Blackface Twin was that although you could play it extremely loud, the distortion remained relatively low. ULTIMATE GAIN: From clean to brutal hi-gain, this “brute” covers the entire range.
X V-AMP LX1-X User Manual In contrast to the pitch shifter, the detune effect (4) creates a modest out-oftune interval, consisting of only a fraction of a half-tone. It sounds roughly like a permanently activated chorus. The second parameter controls how much your tone detunes: • for models 1 to 3 (-12/-7/-5/-3/+3/+4/+5/+7/+12 half-tones), • for model 4 (-20 to +20% of a half-tone).
X V-AMP LX1-X User Manual 7. Tuner 8. Installation The integrated tuner is activated/deactivated by simultaneously pressing both footswitches. In doing so, the X V-AMP is switched into bypass mode. Use ADJUST to modify bypass volume. 8.1 Audio connections 7.1 Tuning your guitar The chromatic tuner automatically recognizes the frequencies of all the standard guitar notes. For the a string this means a frequency of 110 Hz.
X V-AMP LX1-X User Manual 9. Specifications Instrument Input Dimensions/Weight Type 1/4" TS connector, unbalanced Input impedance approx. 1 MΩ Max. input level +5 dBu Dimensions (H x W x D) approx. 1.97 x 9.25 x 6.89" approx. 50 x 235 x 175 mm Weight approx. 1.76 lbs / 0.80 kg Shipping weight approx. 4.40 lbs / 2 kg Line/Headphone Output Type 1/4" TRS stereo connector, balanced Output impedance approx. 50 Ω Max.
X V-AMP LX1-X User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION X V-AMP LX1-X Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.: Phone: +1 425 672 0816 Fax: +1 425 673 7647 X V-AMP LX1-X complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
We Hear You