Users manual X V-AMP Version 1.
X V-AMP IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
X V-AMP X V-AMP Ultra-Flexible Modeling Amp/Multi-Effects Processor with Integrated Expression Pedal 16 original V-AMP amp/speaker simulations, including a special acoustic simulation and amp bypass function s Freely assignable expression pedal for real-time control of effects or wah/volume control s 24-bit high-resolution stereo multi-effects processor including first-class stomp box simulations, delay, wah wah, chorus, flanger, reverb, noise gate and compressor effects and many more s Amp and cabi
X V-AMP TABLE OF CONTENTS FOREWORD Dear Customer, welcome to the team of X V-AMP users, and thank you very much for expressing your confidence in BEHRINGER by purchasing the X V-AMP. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: to present an outstanding guitar multieffects floor unit whose amazing functions offer a maximum on flexibility and performance.
X V-AMP 1.1.1 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased.
X V-AMP + while you turn ADJUST allows you to determine the center frequency of the filter. You can restore a single factory preset by keeping the TAP and STORE keys depressed simultaneously for longer than 2 seconds. You can also restore all factory presets. This is done by keeping both TAP and STORE keys depressed for longer than 2 seconds and then powering up the X V-AMP (i.e. you start the procedure when your X V-AMP is off). DELAY. Pressing this key adjusts DELAY.
X V-AMP 2nd FUNCTION. As soon as any second-layer function on the FX/AMPS control is dialed up, 2nd FUNCTION LED lights up. FX/AMPS. A LED on the FX/AMPS control indicates the current AMP model. If the 2nd FUNCTION LED is also lit up, youre dealing with one of the second-layer AMP models (gray); if not, then one of the first-layer AMP models is selected (white). By turning FX/AMPS (and by holding tap, if necessary), you can switch to another AMP model.
X V-AMP 3.2 Application (example) Our example shows a typical X V-AMP application: Connection to a guitar amp (BEHRINGER V-TONE GMX212) using operating modes A1-F3 (without speaker simulation). The V-TONE GMX212 features a stereo aux input, while many other amps have only a mono instrument input. For jam sessions at your own pad, connect a set of high-quality headphones (e.g. our BEHRINGER HPS3000) to the LINE OUT/PHONES connector. Fig. 3.1: Standard application (example) 4. PRESETS 4.
X V-AMP 4.4 Discarding an edited preset/ restoring a single factory preset If you have edited a preset and find that you dont like the edited version, simply choose a different preset to discard your edits. You can restore a single factory preset by keeping TAP + STORE depressed for longer than 2 seconds. 4.5 Restoring all factory presets Restoring all factory presets is done by keeping TAP + STORE depressed for longer than 2 seconds while you power up the X V-AMP. 5.
X V-AMP 6. EFFECTS PROCESSOR The second parameter controls resonance, the third controls the phaser model (1 - 4). A special feature of your X V-AMP is its built-in multi-effects processor module offering 16 different groups of first-class effects such as chorus, flanger, delay, auto wah as well as various combinations of effects. You can select one effect out of each of the three effects blocks (modulation, delay and reverb).
X V-AMP AUTO WAH: The American funk in the 70s proved that auto wah had many possible applications. Instead of regulating the filter frequency with your foot, our effect does this automatically, depending on the signal level. In doing so, our effect is similar to the EHX MuTron III in the up position. 7. TUNER The integrated tuner is activated/deactivated by simultaneously pressing both footswitches. In doing so, the X V-AMP is switched into bypass mode. Use ADJUST to modify bypass volume.
X V-AMP 8. INSTALLATION 9. SPECIFICATIONS 8.1 Audio connections The input of your BEHRINGER X V-AMP is a mono 1/4" TS connector. The line out/headphone output comes as 1/4" TRS stereo connector. The line output works with both balanced and unbalanced connections. INSTRUMENT INPUT Type Input impedance Max. input level 1/4" TS connector, unbalanced approx. 1 MW +5 dBu LINE/HEADPHONE OUTPUT Type 1/4" TRS stereo connector, balanced Output impedance approx. 50 W Max.
X V-AMP 10. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. 2.
