User Manual XENYX Q1202 /Q1002 /Q802 /Q502 Premium 12/10/8/5-Input 2-Bus Mixer with XENYX Mic Preamp and Compressor, British EQ and USB/Audio Interface
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. Introduction................................................................ 4 1.1 General mixing console functions....
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual 1. Introduction 1.2 Before you get started XENYX Mic Preamps 1.2.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual 2. Control Elements and Connectors This chapter describes the various control elements of your mixing console. All controls, switches and connectors will be discussed in detail. 2.1 Mono channels 2.1.1 Microphone and line inputs 2.1.2 Equalizer All mono input channels include a 3-band equalizer, except for the Q502USB, which is equipped with a 2-band EQ. All bands provide boost or cut of up to 15 dB.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual FX (Q802/1002/1202USB only) 2.2.2 Equalizer stereo channels (Q802USB) FX sends (or AUX sends) enable you to feed signals via a variable control from one or more channels and sum these signals to a bus. The bus appears at the console’s FX send output and can be fed from there to an external effects device. The return from the effects unit is then brought back into the console on the aux return connectors (Q802USB) or normal channel inputs.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual 2.3 Connector panel and main section 2.3.1 Send/return effects path Fig. 2.7: FX send/return connectors Fig. 2.8: FX send/return controls STEREO AUX RETURN Q802USB only: the STEREO AUX RETURN connectors are used to bring the output of the external effects device (whose input is derived from the aux sends) back into the console.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual 2.3.4 Signal assignment POWER The POWER LED indicates that the console is powered on. Level indicator The high-precision 4-segment display accurately displays the relevant signal level. Fig. 2.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual 3.2 Audio connections You will need a large number of cables for different applications. The illustrations below show how the connectors should be wired. Be sure to use only high-grade cables. Balanced ¼" TRS connector strain relief clamp sleeve ring tip Please use commercial RCA cables to connect the 2-track inputs and outputs. You can, of course, also connect unbalanced devices to the balanced inputs/ outputs.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual 4. Specifications Q1202USB Q1002USB Q802USB Microphone Inputs Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω Source resistance @ 50 Ω Source resistance @ 150 Ω Source resistance Frequency Response Max. input level Impedance Signal-to-noise ratio Distortion (THD+N) Line Inputs Type Impedance Gain range Max. input level Stereo Inputs Type Impedance Gain range Max. input level CD/Tape Inputs Type Impedance Max.
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENYX Q1202USB/Q1002USB/ Q802USB/Q502USB Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
We Hear You
