User Manual XENYX QX2442USB Premium 24-Input 4/2-Bus Mixer with XENYX Mic Preamps & Compressors, KLARK TEKNIK Multi-FX Processor, Wireless Option and USB/Audio Interface QX2222USB Premium 22-Input 2/2-Bus Mixer with XENYX Mic Preamps & Compressors, KLARK TEKNIK Multi-FX Processor, Wireless Option and USB/Audio Interface QX1832USB Premium 18-Input 3/2-Bus Mixer with XENYX Mic Preamps & Compressors, KLARK TEKNIK Multi-FX Processor, Wireless Option and USB/Audio Interface QX1622USB Premium 16-Input 2/2-Bus
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. Introduction................................................................ 4 1.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual 1.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual • Mix: All other mixing console functions fall under this vital category. Creating a mix means primarily adjusting the volume levels of individual instruments and voices to one another as well as giving them the appropriate weight within the overall frequency spectrum. Likewise, you’ll have to sensibly spread individual voices across the stereo image of a signal.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual WIRELESS INPUT This connector accepts a USB receiver for use with BEHRINGER ULM wireless microphones. Note that only one source may be used per channel, either the wireless connection, XLR input, or the 1/4" input. GAIN Use the GAIN control to adjust the input gain. This control should always be turned fully counter-clockwise whenever you connect or disconnect a signal source to one of the inputs.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual 2.1.4 Routing switch, PAN, SOLO and channel fader MAIN The MAIN switch routes the signal to the main mix bus. The channel fader determines the channel’s volume in the main mix (or submix). 2.2 Stereo channels 2.2.1 Channel inputs QX2442USB Fig. 2.4: The panorama and routing controls and the channel fader PAN The PAN control determines the position of the channel signal within the stereo image.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual 2.2.2 Equalizer stereo channels AUX SEND 1, 2 and 4 The stereo channels contain a stereo EQ section. The cut-off frequencies of the high and low bands are 12 kHz and 80 Hz respectively, while the center frequencies of the high-mid and low-mid bands are 3 kHz and 500 Hz respectively. The HIGH and LOW controls have the same characteristics as the EQ in the mono channels. Both mid range bands are of the peak filter type.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual AUX SEND (FX) The AUX SEND (FX) jack carries the master aux mix (from the channel’s FX controls). You can connect this to an external effects device to process the FX bus. The processed signal can then be brought from the effects device back into the STEREO AUX RETURN jacks. The first aux send (MON) on this console is used to set up the monitor mix from the channels and route it to the MON SEND fader. 2.3.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Monitor mix with effect 2.3.6 Supplement to QX1832USB In this instance, your effects device should be set up as follows: the AUX SEND 2 jack should be connected to the L/Mono input of your effects device, with its outputs coming back into the STEREO AUX RETURN 1 jacks.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Possible applications for the Voice Canceller are obvious: you can very simply stage background music for Karaoke events. Of course, you can also do this at home or at your rehearsal room before you hit the stage. Singers with their own band can practice singing difficult parts using a complete playback from a tape player or a CD, thus minimizing rehearsal time. SUB 1-2 or SUB 2.3.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual PFL (LEVEL SET) 2.3.12 Subgroups and main mix fader To activate the PFL function, press the MODE switch. The PFL function should, as a rule, be used for level setting (GAIN). The signal is sourced pre-fader and assigned to the mono PFL bus. In “PFL” mode, only the left side of the peak meter is in operation. A PFL’d channel should be driven to the 0 dB mark of the VU meter.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual EQ IN Use this switch to activate the graphic equalizer. 4. Adjust parameter 1 and 2: • After you have selected a preset (step 3), press the PARAM 1/2 button to enter Edit Mode. The LED on the left side of the PARAM 1/2 button will light to indicate parameter 1 is active. MAIN MIX/MONITOR This toggles the graphic equalizer between the main mix and the monitor mix.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Multi-FX Processor Preset Chart # Preset Name Param. 1 Range Param. 2 Range Param. 3/TAP Range (LED indication) 01 – 04 REVERB A – NATURAL LARGE HALLS 01 CHURCH Decay Time 1.00 to 10.00 Room Shape 1 to 50 Damping 02 CONCERT HALL 1 Decay Time 0.50 to 5.00 Chorus 1 to 30 Damping 03 CONCERT HALL 2 Decay Time 1.00 to 5.00 Early Refl. Level -12 to +12 Damping 04 THEATER Decay Time 0.40 to 3.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual # Preset Name Param. 1 Range Param. 2 Range Param. 3/TAP Range (LED indication) 20 – 23 MODULATION 20 CHORUS Depth -20 to +20 LFO Speed 0.05 to 5.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual 5. Rear Panel Connectors 5.3 Inserts 5.1 Main mix outputs, insert points and control room outputs QX1622USB Fig. 5.3: Insert points ◊ On the QX2442USB the channel insert points are located on the control panel between the line input and the GAIN control. QX2442USB Fig. 5.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual 5.5 Voltage supply, phantom power supply and fuse 6. Installation 6.1 Cable connections You will need a large number of cables for the various connections of the console. The illustrations below show the wiring of these cables. Be sure to use only high-grade cables. ¼" TS footswitch connector strain relief clamp sleeve All Models tip Fig. 5.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Unbalanced ¼" TS connector ¼" TRS headphones connector strain relief clamp strain relief clamp sleeve sleeve tip ring tip sleeve (ground/shield) sleeve ground/shield ring right signal tip (signal) Fig. 6.3: ¼" mono plug tip left signal Fig. 6.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual 7. Specifications QX2442USB Microphone Inputs Equalizer 3-Band Semi-Parametric XENYX Mic preamps 10 Low 80 Hz / ±15 dB Type XLR connector, balanced, discrete input circuit Mid Variable 100 Hz - 8 kHz / ±15 dB High 12 kHz / ±15 dB Mic E.I.N.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual QX2222USB Microphone Inputs 2-Track Out Type RCA connector XENYX Mic preamps 8 Impedance 1 kΩ Type Max. output level +22 dBu XLR connector, balanced, discrete input circuit Mic E.I.N.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Equalizer 4-Band Fixed DSP Low 80 Hz / ±15 dB Type KLARK TEKNIK Low mid 500 Hz / ±15 dB Converter 24-bit Sigma-Delta High mid 3 kHz / ±15 dB 64/128-times oversampling High 12 kHz / ±15 dB Sampling rate 40 kHz Channel Inserts Type 1/4" TRS connector, unbalanced Max. input level Wireless Input USB dongle +22 dBu AUX Sends Type 3 x 1/4" TRS connector, balanced Impedance 120 Ω Max.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual QX1832USB Microphone Inputs Equalizer 3-band semi-parametric XENYX Mic preamps 6 Low 80 Hz / ±15 dB Type XLR connector, balanced, discrete input circuit Mid Variable 100 Hz - 8 kHz / ±15 dB High 12 kHz / ±15 dB Mic E.I.N.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual QX1622USB 2-Track Out Microphone Inputs Type RCA connector XENYX Mic preamps 4 Impedance 1 kΩ Type Max. output level +22 dBu XLR connector, balanced, discrete input circuit Mic E.I.N.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual Equalizer 4-Band Fixed DSP Low 80 Hz / ±15 dB Type KLARK TEKNIK Low mid 500 Hz / ±15 dB Converter 24-bit Sigma-Delta High mid 3 kHz / ±15 dB 64/128-times oversampling High 12 kHz / ±15 dB Sampling rate 40 kHz Channel Inserts Type 1/4" TRS connector, unbalanced Max. input level Wireless Input USB dongle +22 dBu AUX Sends Type 2 x 1/4" TRS connector, balanced Impedance 120 Ω Max.
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENYX QX2442USB/QX2222USB/ QX1832USB/QX1622USB Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
We Hear You
