User's Manual

Safety
13
All ELENOS s.r.l products are compliant with the safety standards required for this type
of equipment.
2.1 Safety precautions
The user must follow also the safety precautions listed below:
D The original configuration of the equipment must absolutely not be modified. On
receipt of the same equipment it is essential to check whether the supply is compliant
with the order’s specific terms and in case of nonconformities please report it immedi-
ately Elenos Srl.
D Protective devices must not be disconnected (with exception of their replacement),
altered or modified without authorization.
D Check all protective devices periodically after the occurrence of a fault (e.g. devices
against excess voltage, against excess currents, circuit breakers, etc.).
D To guarantee safety of the personnel and to protect the equipment from damages it
is absolutely forbidden to put it into operation and/or to use it while the doors are open
and/or without the partial or whole presence of protection panels and/or without
grounding connection, which must always be of extremely high quality and in accor-
dance with regulations in force. It is also forbidden to disconnect and/or to alter the
equipment’s means of protection.
D Before starting any operation, the equipment must be disconnected from the mains.
Disconnection must be verified via visual inspection.
D The equipment must be powered exclusively with the appropriate voltage. An incor-
rect power voltage can cause irreparable damages to the equipment and to the per-
sonnel working with it. This same information is reported on the product’s nameplate,
which is generally located upon its casing. In no case must the name plate be
removed, even if the equipment is resold.
D The equipment must be powered by an electrical system which is compliant with the
regulations in force.
D On the equipment can be found further pictograms reporting safety warnings that
must be carefully followed by anyone that has to work with it. The lack of respect for
rules here described exempts the Constructor from all liability for all possible dam-
ages or accidents occurring to persons or property and place responsibility to the user
himself.
Hazardous voltage