Manual

ManualsBrandsBEI Sensors ManualsToolsIndustrial Duty Inclinometers

INDUSTRIAL INCLINOMETER

DEVICENET INTERFACE

The industrial inclinometers are compact solutions for determining the inclination in both single and dual

axes with remarkable precision and at a lower expense. The molded housing provides the mechanical

stability and the fully encapsulated sensor has a high environmental protection making it ideal for

measuring tilt / slope in industrial environments.

Main Features

− Dual Axis Inclinometer ± 80°

− Single Axis Inclinometer 0° to 360°

− High Resolution: 0.01°

− Accuracy: 0.1°

− Rugged Glass Fiber Reinforced PBT Housing

− High Mechanical Stability

− Active Linearization and

Temperature Compensation

− Interface: DeviceNet

− Housing Protection Class: IP 69K, IP68, IP67

Electrical Features

− Highly Integrated Circuit In SMD-Technology

− Polarity Inversion Protection

− Over-Voltage-Peak Protection

Programmable Parameters

− Baud Rate

− Node ID

− Software Filters (Coming Soon)

− Preset (Coming Soon)

− Scaling Function (Coming Soon)

− Termination Resistor (Coming Soon)

Applications

− Measurement of Inclinations and

Rotational Movements

− Cranes and Construction Machines

− Robotic Arms & Positioning Systems

− Mobile Platforms

− Marine & Offshore Machinery

Summary of content (8 pages)

PAGE 1
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE The industrial inclinometers are compact solutions for determining the inclination in both single and dual axes with remarkable precision and at a lower expense. The molded housing provides the mechanical stability and the fully encapsulated sensor has a high environmental protection making it ideal for measuring tilt / slope in industrial environments.
PAGE 2
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE Technical Data Electrical Data Model INC-080 INC-360 Measuring Range ± 80° 360° Number of Axes 2 1 Resolution 0.01° Accuracy (T = 10 °C to +40 °C)* 0.
PAGE 3
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE MTBF Data Failure Rate [FIT] 759 MTBF [Hours] 1,317,822 MTBF [Years] 150 The above mentioned data were calculated for electronics under the following conditions: SNA: Non-mobile operation Tu: 40°C - Mean component of ambient temperature Zf: Continuous operation for 8760 h per year Programmable Parameters Resolution per 1° The resolution parameter per 1° is used to program the desired number of steps per 1°. The values 1, 10 and 100 can be programmed.
PAGE 4
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE Mechanical Drawing – Industrial Housing Dimensions in mm and [inches] For more detailed drawings please refer website.
PAGE 5
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE Measurement Axes INC-080 – Dual Axis Inclinometer INC-360 – Single Axis Inclinometer Page 5 Devicenet Industrial Datasheet Version: 20130503
PAGE 6
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE Pin Assignment The inclinometer is connected via a 5 pin M12 A-coded round connector. (Standard M12, Male side at sensor, Female at connector counterpart or connection cable) Signal Pin CAN Ground 1 VS Supply Voltage 2 0 V Supply Voltage 3 CAN High 4 CAN Low 5 For more detailed information about setup, measurement axes and programming, refer Manual. Please read the instruction leaflet carefully prior to installation.
PAGE 7
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE INC-080 – X axis Output values (factory setting: Resolution = 0.01) INC-080 – Y axis Output values (factory setting: Resolution = 0.
PAGE 8
INDUSTRIAL I NCLI NOME TER DEVI CENET INTERFACE Models/Ordering Description Description Range Type key INC- XXX- 360° (1 axis) 360 ± 80° (2 axis) 080 X- XX XX- X Number of axis One for 360° Version Two for ± 80° Version Interface DeviceNet Version Software Version Mounting Vertical for 360° Version V Horizontal for ± 80° Version H X X- XX 1 2 D1 Housing Material Industrial (PBT) Inclinometer Series INC II Connection Connector 00 E 2 PM Typical Type-Keys INC-360-1-D100-VE2-