Manual

Page 6
Devicenet Industrial Datasheet
Version: 20130503
INDUSTRIAL INCLINOMETER
DEVICENET INTERFACE
Pin Assignment
The inclinometer is connected via a 5 pin M12 A-coded round connector.
(Standard M12, Male side at sensor, Female at connector counterpart or connection cable)
Signal
Pin
CAN Ground
1
V
S
Supply Voltage
2
0 V Supply Voltage
3
CAN High
4
CAN Low
5
For more detailed information about setup, measurement axes and programming, refer
Manual.
Please read the instruction leaflet carefully prior to installation.
INC - DeviceNet Output
INC-360 – Output values (factory setting: Resolution = 0.01)