Owner's manual

ManualsBrandsBEI Sensors ManualsToolsIndustrial Duty Inclinometers

INDUSTRIAL INCLINOMETER

ANALOG & RS232 INTERFACE

The industrial inclinometers are compact solutions for determining the inclination in both single and dual

axes with remarkable precision and at a lower expense. The molded housing provides the mechanical

stability and the fully encapsulated sensor has a high environmental protection making it ideal for

measuring tilt / slope in industrial environments.

Main Features

− Dual Axis Measurement Range ±80°

− Single Axis Measurement Range 360°

− High Resolution: 0.01°

− High Accuracy: 0.1°

− Rugged Glass Fiber Reinforced PBT Housing

− Active Linearization

− Temperature Compensation

− Digital Interface: RS232, Code ASCII

− Analog Interface: Voltage, Current

− Highest Protection Class: IP69K, IP68, IP67

Electrical Features

− Highly Integrated Circuit in SMD-Technology

− Polarity Inversion Protection

− Over-Voltage-Peak Protection

Programmable Parameters

− Preset

− Baud Rate

− Software Filters

− Resolution

− Analog Teach-In

Applications

− Measurement of Inclinations and Rotational

Movements

− Cranes and Construction Machines

− Robotic Arms & Positioning Systems

− Mobile Platforms

− Marine & Offshore Machinery

Summary of content (10 pages)

PAGE 1
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE The industrial inclinometers are compact solutions for determining the inclination in both single and dual axes with remarkable precision and at a lower expense. The molded housing provides the mechanical stability and the fully encapsulated sensor has a high environmental protection making it ideal for measuring tilt / slope in industrial environments.
PAGE 2
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE Technical Data Electrical Data Model INC -080 INC -360 Measurement Range ± 80° 360° Number of Axes 2 1 Voltage 0.5 to 4.5 V, 0° = 2.5 V Load ≥ 10 KΩ with 12 V DC 0.5 to 4.5 V, 0° = 0.5 V Load ≥ 10 KΩ with 12 V DC Current 4 mA to 20 mA , 0° = 12 mA 1 Load ≤ 270 Ω 4 mA to 20 mA , 0° = 4 mA 1 Load ≤ 270 Ω Analog Interface Digital Interface RS232 (ASCII Format) Baud Rate Max. 115200 Baud (Programmable) Resolution 0.
PAGE 3
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE Environmental Conditions Operating Temperature -40 °C to +85 °C / -40 °F to 185 °F Humidity 98 % Relative Humidity, Non-Condensing Protection Class (EN 60529) IP 69K (With Appropriate Counter Connector), IP68, IP67 MTBF Data Failure Rate [FIT] 759 MTBF [Hours] 1,317,822 MTBF [Years] 150 The data mentioned above were calculated for inclinometer electronics under the following conditions: − SNA: Non-mobile operation − Tu: 40°C - Mean component
PAGE 4
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE Programmable Parameters The parameters of inclinometer can be re-configured using the RS232 interface . Additionally Preset can also be done through a (soon to be available) Analog Teach-in. (Refer to User Manual for additional information.) Modes of Operation Inclinometer can be switched between Polled Mode or Continuous mode. Baud rate The Baud rate can be programmed to lie between ranges of 2400 Baud and 115200 Baud.
PAGE 5
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE Mechanical Drawing -Industrial Housing Dimensions in mm and [inches] Page 5 Analog Industrial Data Sheet Version: 20130503
PAGE 6
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE Measurement Axes INC -080 – Dual Axis Inclinometer INC-360 – Single Axis Inclinometer Page 6 Analog Industrial Data Sheet Version: 20130503
PAGE 7
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE Pin Assignment The inclinometer is connected via an 8 pin M12 A-coded round connector. (Standard M12, Male side at sensor, Female at connector counterpart or connection cable).
PAGE 8
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE INC-080 – X-Axis Voltage Output INC-080 – Y-Axis Voltage Output Page 8 Analog Industrial Data Sheet Version: 20130503
PAGE 9
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE Current Output INC-080 – X-Axis Current Output INC-080 – Y-Axis Current Output Page 9 Analog Industrial Data Sheet Version: 20130503
PAGE 10
INDUSTRIAL I NCLI NOME TER ANALOG & RS232 I NTER FACE INC 360 – Current Output Models/Ordering Description Description Range Number of axis Interface Type key INC- XXX- 360° (1 axis) 360 ± 80° (2 axis) 080 One for 360° Version Two for ± 80° Version X- XXX- X- X SVO SV2 RS232 + Current 4 to 20 mA SC0 Version Software Version Mounting Vertical for 360° Version V Horizontal for ± 80° Version H Industrial (PBT) Inclinometer Series INC II Connection Connector X- XX 1 2 RS232 + Vol