Instruction Manual

Hardware Replacement
6.2 ReplacingtheRearCover
The following is needed:
• Anewrearcover,seeAvailable Spare Parts for EPC TA100 AM
• AtorxT10screwdriver
Note:
MakesuretouseadequateESDprotection.
Follow the steps below to replace the rear cover:
1.
Power off the Panel PC.
2.
Remove the rear cover of the Panel PC by loosening the 4 torx screws.
4 x torx screws
3.
Re-assemble with the new rear cover in reverse order.
BeijerElectronics, MAEN043
18