Owner's manual

Foreword
InstallationmanualforEPCTA100AM
Foreword
The EPC AM TA series includ es compact, mechanically robust, fanless industrial
Panel PCs.
The embedded PC system is available with a 6.4", 10.4" or 15" high-contrast
industrial color TFT display. The analog resistive touch screen is the bas is
of communication between human and machine. The combination of a
standardized CPU unit and different front u nits efficiently meets customer
requirements. Another advantage is the compact installation d imensions, made
possible by using special processors and cooling elements that effectively reduces
the need of temperamental fan systems. Additionally, hard drives are replaced by
internal NAND Flash and SD cards that contributes to a very low failure quota
despite the often rough industrial con ditions.
The EPC AM TA series comes with the Windows® XP Embedded operating
system, which allows you to visualize and control your systems reliably in a harsh
environment.
This manual describes how to install the EPC TA100 AM.
Order no: MAEN040
Copyright © 2010-12 Beijer Electronics AB. All rights reserved.
The information in this document is subject to changewithoutnoticeandisprovidedasavailableatthe
time of printing. Beijer Electronics AB, including all its group companies, reserves the right to change any
information withou t updating this publicatio n. Beijer Electronics AB assumes no responsibility for any
errors that may appear in this document. Read the entire installation manual prior to installing and using
this equipment. Only qualified p e rso nnel may install, operate or repair this equipment. Beijer Electronics
AB is not responsible for modified, altered or renovated equipment. Because the e quip ment has a wide
range of applications, users must acquire the appropriateknowledgetousetheequipmentproperlyintheir
specific app lications. Persons responsible fo r the application and the equipment mu st themselves ensure
that each applic ation is in comp liance with all relevant requirements, standards and legislation in respect to
configuration and safety. Only parts and accessories manufactured according to specifications set by Beijer
Electronics AB may be used.
BEIJER ELECTRONICS AB, INCLUDING ALL ITS GROUP
COMPANIES, SHALL NOT BE LIABLE TO ANYONE FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE INSTALLATION, USE OR
REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT,
CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL BE
THE REPAIR, REPLACEMENT, OR REFUND OF PURCHASE PRICE,
AND THE CHOICE OF THE APPLICABLE REMEDY SHALL BE AT
THE SOLE DISCRETION O F BEIJER ELECTRONICS AB .
BeijerElectronics, MAEN040