Instruction Manual

Hardware Replacement
8.3 ReplacingtheRearCover
The following is needed:
• Anewrearcover,seeAvailable Spare Parts for iX Panel T150
• AtorxT10screwdriver
Note:
MakesuretouseadequateESDprotection.
Follow the steps below to replace the rear cover:
1.
Power off the operator panel.
2.
Remove the rear cover of the operator panel by loosening the 4 torx screws.
4 x torx screws
3.
Re-assemble with the new rear cover in reverse order.
BeijerElectronics, MAEN008
23