Instruction Manual

Hardware Replacement
8.5 ReplacingtheCompleteFront
The following is needed:
• Anewfront,seeAvailable Spare Parts for iX Panel T150
• AtorxT10screwdriver
Note:
MakesuretouseadequateESDprotection.
Follow the steps below to replace the complete front of the iX Panel T150:
1.
Power off the operator panel.
2.
Follow the steps 1-3 and 5 in the Replacing the Display/Display Cable instruc-
tions, but in step 3, only disconnect the flex cable and the LED cable (do not
remove the power card).
3.
Attach the new front.
4.
Re-assemble the unit.
BeijerElectronics, MAEN008
27