User Manual

Command Reference

Elektronik-Systeme Lauer, MAEN976 87

6.42 LAU_CONFIG_GETECDISCOLOURTEMP

(0x0117)

ECDIS Default Color Temperature

If ECDIS mode is enabled, the backlight and video controller are configured with

predefined settings. This command returns the predefined color temperature used to

setup the video controller in ECDIS mode.

Supported since Firmware Version

MT223 NAV-230G: 1.0

MT226 NAV-230G: 1.0-DSCALE2

Command Stream

Response Message (Acknowledge)

Maximum Lr for this Command

0 1 2 3 4 5 6 7...8 9

0x07 ADR

0x4C 0x41 0x55 0x02 ICHKH 0x01 0x17 ICHKD

0 1 2 3 4 5 6 7 8

0x06 ADR

0x4C 0x41 0x55 0x01 ICHKH Ret ICHKD

MT223 NAV-230G

Ret

Value: 0: 9300K

1: 7300K

3: 5000K

4: USER

Type: Byte

Length: 1

Description: Color temperature used in ECDIS mode

MT226 NAV-230G

Ret

Value: 0: DEFAULT

1: 4200K

2: 5000K

3: 5400K

4: 6500K

5: 7200K

6: 9300K

7: 12000K

8: USER

Type: Byte

Length: 1

Description: Color temperature used in ECDIS mode