User Manual

Installation
4.
Secure the operator panel in position by screwing the slotted thumb screw
clockwise, allowing the built-in brackettoflipoutandtightenagainstthe
cabinet.
x 4 or 8
For 4.3 ″ ,7.0 ″ and 10.0 ″ panels.
Tighten the screws to 0.5 - 1.0 Nm.
For 12.1 ″ ,15.0 ″ and 21.5 ″ panels.
Tighten the screws to 0.7 Nm ± 0.2 Nm.
5.
Secure the operator panel in position using the built-in brackets or screws,
depending on the panel type.
6.
In cases where the front panel seal (IP54 or greater, NEMA-4X) is critical,
atorquewrenchshouldbeusedtoensureallscrewsaretorquedwithinthe
specification above.
Beijer Electronics, MAEN202
16