User Manual

Installation
3.2 Installation Process
The following is needed:
• A Phillips/slot screwdriver
1.
Unpack and check the delivery. If damage is found, notify the supplier.
Note:
Place the operator panel on a stable surface duringinstallation.
Dropping the operator panel or letting itfall maycause damage.
2.
To cut a correct opening for t he operator panel, use the cut out dimensions
in the outline drawing. A separate cut out drawing is available for download
from the Beijer Electronics web site. For more information, see sections
Operator Panel Drawings and Technical Data.
3.
Install the operator panel into the cutout.
Beijer Electronics, MAEN202
15