Product Description

© 2018 Beijing Beebox Technology Co.,Ltd. all rights reserved. Printed in China.
Add: 23A,JingYuan Arts Center, No.3 GuangQu Road,ChaoYang District,Beijing,100124
317-00487-01
BRD-AG-SD1
Support
Support(optional)
Support
Android 7.0
Professional Wide-angle Dual Camera (Visible Light & Infrared)
8.0inch Touch LCD，800*1280
-10℃ ~ 55℃
5%-95%(Non-condensing)
DC 12V 3A
119*76*348mm
Wi-Fi
Bluetooth
Ethernet
Wiegand TX*1，Wiegand RX*1，Relay*1，RS232*1，RS485*1，
USB2.0*3，RJ45*1，Audio*1
Support
Product Number
Living Security
Qr code Scanning
Multi-touch
OS
Camera
Display
Operating temperature
Relative Humidity
Power Cord Rating
Dimensions
Communication Method
Physical Interface
Power On
Specification
Rotatable Angle：46°~77°
6°
25°
+12VDC
IN
+
_
2.4 GHz/5 GHz（5150MHz-5250MHz;
5725MHz-5850MHz, IEEE 802.11a/g/b/n；IEEE 802.11ac
BT4.1+BLE
Support
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Cable B
TTL
USB5
Audio
LAN
USB1
USB2
USB3
Cable A
USB4
GND
RS485_A
RS485_B
GND
RS232_RX
RS232_TX
WG_D0_O WG_D1_O GND WG_D0_I WG_D1_I GND Relay_NC Relay_NO Relay_COM
Port Description
Figure 4
Figure 5