User's Manual

V1.0M122 PULSE OXIMETER OPERATOR＇S MA NUAL
12
The socket is also used for USB cable connected with the PC for data transmission. For
more information on data transmission and data management，refer to corresponding
software instruction manual.
4 Setting ID, Date and Time
Always set the date and time before using the unit for the first time. Set different ID
numbers for different users.
Check the date and time are correct before using the unit,and reset them if necessary. The
date and time are important indicators when a measurement is taken.
4.1 Date & Time Settings
Set the correct time according to the following steps:
1) Press the power switch for 3 seconds to power on the oximeter and then press the
menu button to enter the main menu, refer to the fig.4-1.
Fig.4-1
2) Press the Down button to select “Date and Time” item, and then press the Menu button
to enter the time setup screen， refer to Fig.4-2.