User's Manual

V1.0M122 PULSE OXIMETER OPERATOR＇S MA NUAL
21
Brightness level: 1-7
Bright time: ON, 15, 30, 45, 60, 75, 90,105,120 seconds.
6.3.2 Bluetooth
Enter BlueTooth screen from the System Setting screen, and set the Bluetooth on or off
before transferring data to software for reviewing or analyzing data.
Notes:
 For details, refer to attached Software Instruction Manual.
 When the Bluetooth is free from transferring data for 2 minutes, the Bluetooth will be
closed.
6.3.3 Beep setting
Enter Beep setting screen from the System Setting screen, and set the beep level and
on/off.
Beep level: 1-7
Beep(switch): on or off.
6.3.4 Display mode
Enter Display Mode screen from the System Setting screen, and select the display mode
for measurement screen from Wave and digital.
Select ‘Wave”, SpO
2
plethysmogram will be displayed on the lower screen of the
measurement screen.
6.3.5 Keyboard lock
Enter Keyboard lock screen from the System Setting screen, and set the lock function
on/off. If set to on, long press the Lock button， the Menu/select, Up and Down, Alarm
inhibition buttons on front panel will be deactivated，except the Alarm off，power switch and
lock buttons.
To unlock the keyboard，long press the Lock button again.
6.3.6 Power Auto
Enter Power Auto screen from the System Setting screen, and set the auto power-off time
and set the auto power-off on/off.
Auto power-off time: Set how long not any operation is taken before the device
automatically power off.
Time: 1,2,3,4,5…15 minutes.
Auto: Set the auto power-off function on or off.
6.3.7 About
Enter About screen from the System Setting screen, the version of software is displayed.
6.3.8 Default Setup