User's Manual

V1.0M122 PULSE OXIMETER OPERATOR＇S MA NUAL
4
z This equipment is for use in the medical field, and measurement results only serve as a
reference for any relevant treatment.
z Connect the probe correctly; please see the directions for use of any accessories.
z Please follow the doctor’s suggestions when starting to monitor the vital sign
parameters.
z When connecting this device to other peripherals, make sure that you are qualified to
operate this device. Any peripheral must be certified according to the protocol of IEC
950 and IEC 601-1-1. Any input/output device should follow the protocol of IEC
601-1-1.
z Considering the probe is a sensitive device so please strictly follow the probe
application instructions.
z The malfunction of probe may cause inaccurate data which serves as a foundation to
treat patients, so make sure to pay more attention to the probe and inspect it usually.
z The worn-out data cables may cause inaccurate data which is used as a reference to
treat patients, so please pay attention to the data cable and check it frequently.
z Do not touch the AC adapter with wet hands. Otherwise，You may suffer electric shock.
z The disposable accessories should not be cycled.
z This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Cautions
z Clean the probe with an H
2
O solution and a neutral detergent. Don’t submerge the
probe. Do not use in autoclave (sterilizer).
z This device is intended for use by persons trained in professional health care. The
operator must be thoroughly familiar with the information in this manual before using
the device.
z Before cleaning or disinfecting the probe, unplug it from the oximeter to prevent probe
or oximeter from being damaged, and to protect user under safety situation.
z To avoid an electrical hazard, never immerse the unit in any liquid or attempt to clean it
with liquid cleaning agents. Always disconnect the device from AC adapter before
performing cleaning of maintenance.
z Alarm must be set up according to different situations of individual patient. Make sure
that chime sound can be activated when alarm function begins to work.
Notes