COTX X1 Hotspot Intelligent IoT Gateway Brief Introduction
Product description The next generation Internet of Things Smart Gateway is compatible with the Helium Network. Based on the LORAWAN protocol, it is a complete 8channel gateway with built-in Ethernet connectivity for easy user configuration. It also supports WiFi-AP mode and LTE-CAT4 uplink connection, facilitating deployment in different scenarios. The terminal data is collected and uploaded to the Internet of Things cloud platform to achieve real-time monitoring.
Interfaces Description
Quick Specifications Quick Specifications CPU MT7628NN Flash 32M Nor Flash RAM 128M DDR2 RAM OS Openwrt(Linux) System frequency 580MHz ETH RJ45(10/100M) BLE（optional） BLE 5.0 LTE（optional） WIFI GPS(optional) Different regions support band range: European region: LTE FDD: B1/B3/B7/B8/B20/B28 WCDMA: B1/B8 North America: LTE FDD:B2/B4/B5/B12/B13/B14/B66/B71 WCDMA: B2/B4/B5 IEEE 802.11b/g/n GPS L1 C/A 1575.42MHz BeiDou B1:1561.
Interface introduction Type-C DC-5V ETH RJ45(10/100M) Button Press and hold the key for 3s to restart the device Antenna interface LoRa: RP-SMA Female Connector WiFi: RP-SMA Female Connector LTE: RP-SMA Female Connector GPS: RP-SMA Female Connector Others SIM card slot LED Indicator Red Blink: system mal-function Green Constant lighting: system working Blink: system boot up User guide Preparing COTX-X1 Gateway Step 1: First insert the SMA male connector of the antenna feeder into the LoRa® Ant
You can find the IP address of X1 through the router or switch according to the MAC address of the device and access it. Configuring Gateway by COTX APP To configure the gateway, please download the COTX APP from Apple APP store or Google Play directly by searching “COTX”.
return Choose your what do you want to add . Step 4: Scan QR Code of The COTX App to Scan the QR Code of the WEB Management Dashboard. The App will obtain device information and register with the Helium network。It will take you approximately 15 minutes to join the Helium network. Then the whole setup process is done.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
