Product Description

User guide
Preparing COTX-X1 Gateway
Step 1: First insert the SMA male connector of the antenna feeder into the LoRa® Antenna
port of the device and tighten it.
Step 2: Place your gateway to a suitable location (eg. near a window) to provide the best
coverage for devices.
Step 3: If you are using a wired Ethernet connection, connect an Ethernet cable between a
router or switch and the Ethernet Port on the gateway，so the gateway can connect to the
internet.
Step 4: Finally Insert the power adapter into the 110~220VAC mains socket, connect the
power supply into the PWR INPUT on the gateway.
After plugging in the power, If the device indicator is green, the system is running properly.
Interface introduction
Type-C
DC-5V
ETH
RJ45(10/100M)
Button
Press and hold the key for 3s to restart the device
Antenna interface
LoRa: RP-SMA Female Connector
WiFi: RP-SMA Female Connector
LTE: RP-SMA Female Connector
GPS: RP-SMA Female Connector
Others
SIM card slot
LED Indicator
Red
Blink: system mal-function
Green
Constant lighting: system working
Blink: system boot up