COTX-X5 Outdoor Gateway COTX-X5 Outdoor Gateway Intelligent IOT Gateway Quick Start Guide Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Package Contents Your COTX-X5 Outdoor Gateway comes with the following items: 1 3 4 2 1 1 1 1 3 2 1 1 COTX-X5 outdoor gateway installation kit fixing screws (including accessories) long connecting rod screws (including nuts) ground screw waterproof and breathable valve waterproof interface waterproof plug (Type N) external antennas stirrups power cord POE module Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Warnings Pay attention to these important warnings when using your Outdoor Gateway: Never power up the Outdoor Gateway without the LoRa antenna connected as this may damage the device. Before outdoor installation, make sure you tighten all connectors and the case itself very well to avoid any unintended water ingress. Structure size The outer dimension of COTX-X5 is 227 x 82 x 192 mm, as shown below: Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Interface description Quick Specifications General Specification Weight 1.7Kg Material Alluminum Case + Plastic Cover Installation On the Pole/ Wall Operating Temperature -40~55℃ Power Consumption Method POE (802.3at) Max Power ＜25.5W LoRa Performance Max Emitting Power Frequency Channel 902.3~914.9MHz 20dBm 923.3~927.
COTX-X5 Outdoor Gateway Platform Spec RAM CPU OS Main-board Interfaces Internet WiFi 4G Bluetooth SD Card LoRa Antenna 4G Antenna WiFi/BT Antenna LED Indicator System Indicator Internet Indicator WiFi Indicator LTE Indicator BLE/LoRa Indicator 2GB LPDDR4-3200 SDRAM (4G/8G Optional) Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz Ubuntu20.04 Raspberry Pi 4B 1*10/100/1000M Ethernet interface(RJ-45) 2.4 GHz and 5.0 GHz IEEE 802.11ac Universal Channel, Cat1 Rate Bluetooth 5.
COTX-X5 Outdoor Gateway Quick Installation Guide Pole Mounting Step1 Place the base bracket on the back of the device with four M6*4 screws as shown below: Step2 Attach the 3-Axis brackets on the back of the device with two number 7 screws as shown below: Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Step3 Insert the steel band clamps through the four holes on the mount kit, wrap the band clamps around the mounting pole, lock and tighten the clamps using a screwdriver. Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Wall Mounting Step1 Fix the axis brackets on the bottom of the device like pole mounting: Step2 Use Ø5mm drill head, drill 4 holes on the wall according to the position of wall mounting bracket, plug the screw anchors to the wall, and fix the device to the wall as shown below; Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Preparing Your Outdoor Gateway Step 1: First, carefully connect the LoRa® antenna to the “Lora” port of the gateway , the Wi-Fi antenna to the “WiFi/BLE” port and the LTE antenna to the “LTE” port. Step 2: Next find a suitable location for your gateway to be positioned. Make sure it will provide the best coverage. Step 3: To integrate Ethernet network, use a network cable and connect the gateway to the switch or router Step 4: The default setting is Power over Ethernet (PoE).
COTX-X5 Outdoor Gateway Power on by PoE Injector Now System LED lights up. When the system gets ready, that light will turn green. Configuring Your Outdoor Gateway To configure the gateway, please download the Helium APP from Apple APP store or Google Play directly by searching “Helium”. Please create a Helium wallet account first and continue to the next steps below: Step 1: Turn on COTX Gateway, so the Helium APP can detect the gateway to further configuration.
COTX-X5 Outdoor Gateway Step 4: Follow the steps on the App and get to the “Bluetooth” page. Gateway Bluetooth is automatically turned on after the COTX outdoor device is powered up. Simply click “Scan for my Hotspot” to pair up. Step 5: Click the entry for your gateway in the app. You can check if it is the correct by matching the last 4 characters shown in the application with the last 4 characters of the mac address printed on the label. Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Step 6: On the app it will show the available Wi-Fi networks within the range of your Gateway. If you are using Ethernet, tap Use Ethernet Instead and skip to Step 7. Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway If using Wi-Fi, tap on the name of your Wi-Fi network on the app which will bring you to the following screen. Type in your Wi-Fi’s network password then tap Connect and it will connect to your Wi-Fi network. Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
COTX-X5 Outdoor Gateway Step 7: The app will then ask for you to set your gateway’s location and you can confirm the location of your gateway. A Helium wallet account should be created first so you can continue to the next step. Step 8: Register the gateway to the Helium Network to provide IOT services for related devices. the setup is now complete. It’ll submit the details of the COTX Gateway to the Helium network. In approximately 15 minutes, will confirm it’s added to the Helium network.
COTX-X5 Outdoor Gateway Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ISEDC RSS warning This device complies with Innovation, Science and Economic Development Canada Compliance licence‐exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
