User's Manual

predict the weather conditions in the next 12 hours. There are 6 types of weather displays,
and the forecast is calculated once every 6 hours.
4) When the current air pressure is higher than the air pressure in the past 1 hour by 1hPa, ""
will be displayed below the weather pattern
5) When the current air pressure is less than 1hPa from the air pressure change in the past 1
hour, "" will be displayed below the weather pattern
6) When the current air pressure is lower than 1hPa in the past 1 hour, "" will be displayed
below the weather pattern
7) When the air pressure changes, the weather becomes rainy, and when the outdoor
temperature is lower than -4 & 24.8 , the rainy day becomes snowy, the order of
change is CH1>CH2>CH3
8) In the standard mode, press and hold the [HAP/INHG] key once to switch the unit of
atmospheric pressure. There are 2 types of units: hPA/mb and inHg.
9) The moon phase level is displayed in the MOON PHASE column. The moon phase level is
divided into 12 levels, as shown in the figure below:
New moon crescent moon first quarter moon waning gibbous moon full moon
waning gibbous moon last quarter moon waning moon
3.4 Date & Time
1) In the standard mode, press the [SET] key to switch the display of the day of the week column of
the time item, and the display can be switched to seconds and days.
2) In the standard mode, press and hold the [SET] key for 2 seconds to enter the time and general
item setting mode. After entering, the setting items are displayed and flashing.
3) In the time and general item setting mode, press [SET] to confirm the setting item result and
switch to the next setting item. The setting item sequence is as follows:
DCF: time system→time zone→time hour→time minute→date format→time year→time
month→time day→week language→exit
WWVB: time system time zone daylight saving time switch time hour time minute
date format time year time month time day number exit
AM/PM
Atomic Time
Alarm/Snooze
Month/Date
Atomic Reception
TIME Zone