Quadcopter Manual Please read and keep this manual carefully before using.
Attention . Quadcopter could be dangerous; it is designed to be used by adults over 18 years . old . Keep enough distance between Quadcopter and people, animals, trees, vehicles or buildings when using it. . Be away from dangerous circumstances such as airports, railways, high ways, tall buildings or electric wires etc. . According to relevant laws and regulations, the flying height of this Quadcopter should be below 120m and the distance between the operator should be under 500m. .
Products & Accessories 1.
Products & Accessories 2.
Products & Accessories 3.
Products & Accessories 4. Accessories for Quadcopter x2 Self-Tightening Propellers Clockwise & Anti-Clockwise 5.
Prepare 2. Charge the Radio Control 1. Charge the Quadcopter Battery 5V 2A . Connect charger to power to charge the battery. . After charging is completed, indicator will be turned off. Indicator Power High Low 100~240 V After charging is completed, indicator will stay on.
Assemble & Disassemble 1. Assemble the Quadcopter a. Undercarriage Undercarriage Lock Turn and hold the undercarriage lock to unlock position; Pull up the undercarriage. Turn the undercarriage till it clicks; Undercarriage will be locked automatically.
c. Protective Frame Assemble & Disassemble b. Integrated Gimbal & Camera(Pro Only) TF Rotate the camera upwards; Plug in TF Card. * Please choose TF cards of mainstream brands, Class 10 and 16G at least. . Use screws and screwdriver in the Tool Box to assemble. . Every Protective Frame needs 2 screws. Gimbal Assemble Switch Turn and keep the Gimbal Assemble Switch; Remove cover. the gimbal Keep the Gimbal Assemble Switch and assemble the gimbal.
Assemble & Disassemble d. Propellers Color Mark Assemble Disassemble . Put propellers on the motors by different Color Marks; Rotate propellers by assemble directions. . Propellers will tighten automatically during flying. 5. Quadcopter Battery . Push the Quadcopter Battery hard into the Battery Compartment till it clicks. .
Assemble & Disassemble 1. Connect Radio Control & Cellphone a. Put Down the Antennas . The rotatable angle of antennas is as this figure. Turn antennas parallel. . Turn antennas 90 degree to Radio Control.
Assemble & Disassemble b. Connect Radio Control & Cellphone Pull out Cellphone Holder. Open the cover on bottom. . Pull out Cellphone Holder; the lower edge of holder will pop up. . Set cellphone on the holeder; Be careful not to hit the power of cellphone. . Open the cover on bottom of Radio Control. .
2. Power on Quadcopter & Radio Control Operation Guide 1. Head Direction Head Direction White White Red Green . The color of Quadcopter Lights is as this figure. . Press power once to check the electrical . The Head Direction is in between two white lights. quantity. . Press power once, then long-press for 2 seconds to power on. on/off.
Operation Guide 3. Radio Control Sticks Up Anti-Clockwis Up Head Direction AntiClockwise Forward Forwar Clockwise Left 向右 Right Left Clockwise Down Backwar Left Stick Right Stick By default, left stick is used to control Quadcopter to move up and down, a.k.a "American Way". Backward The way of control could be changed in App.
Operation Guide 4. Take-off & Landing by Radio Control Pull Slowly Left Stick Right Stick Push left stick upward slowly and steadily Left Stick Right Stick 1. Pull two sticks to the max into shape V and hold for 3 seconds; Propellers will start to rotate. 1. Pull left stick downwards slowly and steadily; Quadcopter will start to land. 2. Release the stick after propellers' rotating. 2. Hold the stick downwards after the undercarriages touch the ground. Propellers will stop in 5 seconds. 3.
Operation Guide 5. Radio Control Shortcuts . When the Quadcopter is flying, turn Normal Flight/Auto Return Mode Switch to the right; Quadcopter will return near to the takeoff point and land automatically. . During return, turn back the Switch to left; Quadcopter will hover. . When the Light of Auto Take-off/Landing Button is white, the Button could be used for making the Quadcopter take off or land. .
Operation Guide 6. Integrated Gimbal & Camera(Pro Only) . Gimbal and camera will be turn on after poweing on the Quadcopter if assembled. . . Turn up and down the left roller of Radio Control, the camera lens will turn up and down in between the range as the figure. Release the left roller, camera lens will stay at the position. 90° 快捷按钮 A 快捷按钮 B 17 . After turning on camera, the Butto A on Radio Control could be used to take a photo and the Button B could be used to take a video.
Operation Guide 7. Get Videos & Images Use App to get real-time aerial videos and images, control camera and download to cellphone. 8. Adjust Quadcopter Head Lights Brightness Turn up and down the right roller of Radio Control to adjust two white lights' brightness on the head of Quadcopter. 9. Operation Tips At any moment during Quadcopter' flying, release two stick of Radio Control; Quadcopter will hover. Maintain & Calibrate 1. Propellers Propellers are fragile.
Regulatory Notice for Users in EU Hereby, Fimi declares that the wireless WEEE Disposal and Recycling Information equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Federal Communications Commission Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Regulatory Notice for Users in USA USA — Federal Communications Commission (FCC) This device are granted with following FCC ID by Federal Communications Commission (FCC) FCC ID: 2AG53YTXJ01FM Name:Integrated Gimbal Camera Model:YTXJ01FM FCC ID:2AG53FXQ01FM Name:Mi Drone Model:FXQ01FM FCC ID: 2AG53YKQ01FM Name:Radio Controller Model:YKQ01FM RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed
Industry Canada Class B Emission Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Exposure statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.