Choose Wireless Adaptor to connect the radio controller and mobile device 1 . Open Mi Drone APP, select “ Next” button. 1 . Connect “MiRC_XXXXXX” device, the default key is “ 123456789”. 2 . Select “Wi-Fi connection” on the dialog box, tap “ OK” button. 2 . Back to Mi Drone APP, APP will complete connection and go to MAP page automatically. .
3. Power on the aircraft and the radio controller Operation Guide 1. Running Mi Drone APP Please ensure Mi Drone APP is running and mobile device, radio controller and aircraft are correct connection, then motor can start to work 2. Aircraft Direction Front Direction White Light Red Light White Light Green Light . Battery is at the aircraft tail direction, gimbal camera is at the aircraft head direction. .
Operation Guide 4. Radio Controller Sticks Up Anti-Clockwise Rotation Up Forward Head Direction Anti-Clockwise Rotation Forward Clockwise Rotation Turn Left Turn right Turn Right Turn L eft Clockwise Rotation Backward Down Backward Left Stick Right Stick Sticks setting can be changed in the Mi Drone APP Down Note: The orienations shown as above figure are base on the head direction.
Operation Guide 5. Take-off and Landing Pull Slowly Pull and keep 2 sticks into shape V Left Stick Right Stick Release 2 sticks when motors start rotating Left stick down slowly untill aircraft touch the ground. Left stick up slowly to take off. Hold left stick down at max level a few seconds untill motors stop rotating. Note: Once need to stop motors rotation emergency, please press and hold 2 keys a few seconds untill motors stop rotating.
Operation Guide 6.Gimbal Camera Power Up 8.Take picture and vedio Gimbal camera will start self-test and go into steady mode when aircraft is turned on. 7.Gimbal Camera Tilt Angle Control Picture Button Vedio Button here are 2 beeps when press picture button to take one picture. There are 2 beeps when press vedio button to start vedio recording, and 4 beeps when press vedio button again to stop vedio recording. Use the left roller on the radio controller to control gimbal camera tilt angle.
Operation Guide 9. Radio controller quick lanuch button . Set the aircraft to the home mode. The aircraft will return to the last recorded Home Point and landing automatically. . The auto return to home function can be interrupted when set the aircraft to the normal flight mode. . The right roller on the radio controller can adjust the aircraft white light brightness. ( The fucntion redefinition can be set by Mi Drone APP. ) .
Maintenance and Calibration 1 .Propellers 6.Matching Operation Propeller is liable to be damaged. please replace it with new one immediately once any damage happened. Damaged proellers will seriously affect flight performance. When the aircraft or the radio controller were replaced, the matching operation is needed between the aircraft and the radio controller. 2.Propeller frames (Option) 1.Power up the aircraft Propeller frame is liable to be damaged.
Maintenance and Calibration 7. Wireless Adaptor 8.Sticks calibration 1. Some model mobile devcie will show “No Internet assess” when wireless adaptor connected with the radio controller, please select “leave you on the same network”. Sticks need to do calibration if the radion controller is beeping when power up. Please follow Mi Drone APP instuction to do sticks calibration. 2.
Indicator Description 1. Aircraft Indicator Description Indicator 3.
Specifications Aircraft Wireless adapter Model: WRJTZ02FM Size: 310 x 380 x 190mm Diagonal Size: 434mm Weight: 0.75Kg(w/o battery) Wireless: Model: WRJDG01FM Size: 45 x 18 x 8.4mm Weight: 5.10g operation frequency: 2.4G Battery Accessories Type: Rechargeable Li-ion Polymer Battery Capacity: 5100mAh/15.2V(77.52Wh) Charger 2 Input: 100-240V~ 50/60Hz 1.5A Output: 16V 2.9A 2 2 Camera Weight: 0.18Kg Aperture: f/2.
Regulatory Notice for Users in EU Hereby, Fimi declares that the wireless WEEE Disposal and Recycling Information equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Federal Communications Commission Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R eg u lat o ry N o ti c e f or U s ers i n U SA USA — Federal Communications Commission (FCC) This device are granted with following FCC ID by Federal Communications Commission (FCC) FCC ID：2AG53FXQ02FM FCC ID: 2AG53YKQ02FM Name：Mi Drone Name：Radio Controller Model：FXQ02FM Model：YKQ02FM FCC ID: 2AG53WRJDG01FM Name：Wireless Adapter Model：WRJDG01FM RF exposure warning antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not
Industry Canada Class B Emission Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Regulatory Notice for Users in Canada This device are granted with following IC ID by Industry Canada (IC ) WRJDG01FM Name：Wireless adapter Model：WRJDG01FM Name：Mi Drone Model：FXQ02FM Name：Radio Controller Model：YKQ02FM IC Statement This device complies with Industry Canada licence-exempt RSS standard(s).
IC RF Exposure statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
