Mi Action Camera 4K User Manual Read this manual carefully before use, and keep it properly for future reference.
1.
2.
13 12 11 14 15 10 10 Touch Screen 12 Battery Cover 14 Battery 11 Lock Button 13 1/4-inch Thread Hole 15 MicroSD Card Slot
3. Install and Disassemble a. Remove the battery cover (as shown in the figure), align the battery pins with the direction of the lens, and insert the battery. To remove the battery, gently pull the handle bar on the battery. b. Keep the label side of the MicroSD card towards the back of the camera body, and insert the card into the card slot. To remove the MicroSD card, gently press the top edge of the card to eject it from the slot. Do not damage the handle bar.
4. Battery Charging a. You can use a 5V 1A power adapter, PC, or mobile power bank to charge the camera via a data cable. It is recommended to turn off the camera during charging. b. The front indicator is solid red while charging, and turns off automatically when the battery is fully charged. Red Off Note: It is recommended to remove the battery if you connect the camera to a power supply for a prolonged period during use.
5. Operating Instructions a. Power-on/Power-off Power-on: Press and hold the function button for about 3 seconds, followed by a power-on sound. Power-off: Press and hold the function button for about 3 seconds, followed by a power-off sound. b. Photo Select the photo mode, and press the function button to take photos. c. Video Select the video mode, and press the function button to start the recording. Press the function button again to stop the recording.
d. Operating screen The preview page is displayed after the camera is powered on (in screen lock mode, you can double-tap the screen or press the function button to wake up the camera). Camera setup On the preview page, slide down to enter setup page. Slide the screen in the reverse direction or press the function button to return to the preview page. Wi-Fi setup / Bluetooth device connection Tap to enable or disable the Wi-Fi function.
6. Quick Setup Control your device and interact it with other smart home devices in Mi Home App. a. Download Mi Home App Scan the QR code or go to App store to download and install Mi Home App. b. Add and connect a Mi Action Camera 4K Tap "My devices" in Mi Home App, select "+" on the upper right, and select Mi Action Camera 4K. Install the plug-in and follow prompts to add the device. Open the Mi Action Camera 4K plug-in. Turn on Mi Action Camera 4K and slide down to access the shortcut menu page.
Note: The GPS must be activated for some certain phones when searching for the Mi Action Camera 4K via Wi-Fi. After the App is connected to the camera successfully, Android phones disconnect the Internet and a prompt indicating no Internet connection is displayed on some certain phones. In this case, choose to maintain the current connection. To upgrade the camera firmware, you need to maintain the phone's connection to the Internet. 7.
8. Specifications Product name: Mi Action Camera 4K Dimensions: 71.5 mm x 42.7 mm x 29.5 mm Net weight: 99 g (including battery) Operating temperature: 0℃~45℃ Storage temperature: -20℃~60℃ Wireless connections: Wi-Fi IEEE 802.11b/g/n Maximum photo resolution: 3840 x 2160 Maximum video resolution: 3840 x 2160p at 30 fps Model: YDXJ01FM Aperture: F2.8 Focal length: 3.2 mm Wide angle: 145° Bluetooth: Bluetooth 4.1 Recording: dual microphone MicroSD card: maximum 64GB Screen: 2.4-inch touch screen 9.
CAUTION RISK OF EXPLOSION IF BATTERIES IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCIONS. Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
Principal: Xiaomi Communications Co., Ltd. Manufacturer: Beijing FIMI Technology Co., Ltd. For further information, please go to http://www.mi.com/en/ Address：No.
纸张：105g京东太空梭 成品尺寸：102*72mm（公差正负0.
