User's Guide

3) Run mode selection

From the main interface, swiping left to the second page takes you to Run

Mode. To activate a Run Mode option, the thermostat System Mode cannot

be OFF. The Run Mode can be switched by selecting the TIMING , ECO

, AWAY , and HOLD icons.

TIMING mode

TIMING is in the system parameter settings. If no timing schedule is

turned on, the default set temperature is executed. (The mode does not

change automatically.) If the device is in TIMING mode, there will be an

icon displayed on the main interface screen.

ECO mode

This is an energy saving mode to use when you’re home or away. This

mode will maintain the room temperature to stay within the preset

cooling or heating temperature range. When activated, the ECO icon

will display on the standby and main interface screens. The range can be

adjusted within the Parameters settings, and it is recommended to have

a smaller preset temperature range than your Away mode.