User's Manual

User Manual
44
transmit protocols for QoS control, and click Add.
2. Set transmission policies. Click "QoS >> Traffic Control >> Policy", enter a
custom policy name for "Name", enter the classifier name for "Classifier", set
the guaranteed bandwidth, maximum bandwidth, and policy priority, and click
Add.
3. Click "QoS >> Traffic Control >> Apply QoS", select the gateway interface,
enter the policy name for "Ingress Policy" and "Egress Policy", click Add, and
then click Apply & Save.
5.3.6 Traffic Control
Method for enabling traffic control in ER800:
Click "Services >> Traffic Control", enable traffic control, set traffic control
parameters, and click Apply & Save. After the settings are completed, the
system generates an alarm, stops forwarding, or disables the interface when the
traffic exceeds the limit according to the settings on this page.