User's Manual

User Manual
86
6.7.2 SNMP Trap (Alarm)
SNMP trap is a type of entrance. When this entrance is reached, the SNMP
managed devices will actively notify the NMS, instead of waiting for the polling
of NMS. In a SNMP-enabled network, the agents on managed devices can
report errors to the NMS anytime, without waiting for the polling from NMS.
The errors are reported to the NMS through traps.
Method for enabling SnmpTrap in ER800:
Click "Administration >> NMP >> SnmpTrap". Enter IP address of the NMS.
Enter the corresponding group name when v1c or v2c is selected, or the
corresponding user name when v3c is selected, ensuring that the name consists
of 1–32 characters. By default, the UDP port ID ranges from 1 to 65535.