User's Manual

1. Clean the treadmill
• Turn off the machine and unplug the power cord.
• Wipe off dust and stains on the frame, front panel and belt.
• Do not wipe backside of the belt.
• After using for a period, dust and stains may appear on the back part, that is normal and
just.
• clean them up.
• Start the treadmill,and keep the belt running at the speed of 3km/h.
• Running belt inclined left: Turn the left adjustment screw 1/4 circle clockwise.
• Running belt inclined right: Turn the right adjustment screw 1/4 circle clockwise.
• Slipping running belt: Turn the left and right adjustment screws clockwise at the same
time a half circle.
• Run the running belt for a period of time (1~2 minutes) to observe the centering
situation. If necessary, please adjust it again.
• Turn off the machine and unplug the power cord.
• Lift up the belt and apply silicone oil on the backside of the belt.
• Power on the treadmill again to run the running belt at 3km/hr for 10-20 seconds.
• 5-10 ml of silicone oil is needed for one time of lubrication.
• Add the silicone oil every 3 months.
05 Safety Notice 06 Maintenance and Service
15 16
Do not store the treadmill
upright.
Anti-pinch Beware of involving
your things.
Do not fold the treadmill with
power-on.
Do not step up and down the treadmill
with belt running.
2. Belt deviation and adjustment
3. Lubricate the Belt