User's Manual

Figure 3-2 Dual-light alignment
3.4 Blackbody Angle Adjustment
Blackbody is a calibration device and a standard temperature source, and IR camera performs
real-time calibration based on blackbody temperature. In the infrared imaging, there is a blackbody
box, which should be completely covered by the imaging of blackbody.
There is a battery cover on the back of blackbody, please rotate the rod of blackbody slowly to
cover blackbody box with one of the marginal area, shown as the red boxed area in the figure below.
Finally tighten the blackbody rod with screwdriver.
Figure 3-3 Blackbody battery cover