User's Manual

1
1. Preparation before Installation
Ming Ji Mini is a temperature measurement device suitable for indoor environments and requires
semi-coordination, which means the temperature results would be better if the tested person stand
in front of the camera for at least 0.5 seconds.
1.1 Site survey
To ensure the best performance, the following installation instructions should be followed.
1) It is required that the visible light channel has sufficient illumination, and avoid backlighting,
strong reflection, strong light changes, blocking and high temperature interference.
2) The installation area needs to be relatively isolated and stable from the surroundings, and try
to avoid outdoor or outdoor connected scenarios. The product is not suitable for environment
with strong airflow, electromagnetic interference or vibration.
3) The depression angle of camera should be less than 15 degrees, and camera elevation is not
recommended.
4) The optimal ambient temperature of the device is 0-40°C.
1.2 Equipment Preparation
For software operation, user has to prepare a monitor, HDMI cable and mouse, or a computer to
connect with video analysis host. Some functions such as library import can only be done with
computer, and some functions such as Bluetooth binding only be operated on the monitor. There
will be detailed instructions below.
2. Installation
2.1 Equipment inventory
When received the package, please count the equipment according to the following list.
Table 2-1Packing List of Ming Ji Mini
S/N
Product
Model
Amount
Unit
1
Video Analysis Host
MegBox-B2R-411-CW (INT)
1
Piece
2 Quality Certificate 1 Piece
3 Warranty Card 1 Piece
4 Bluetooth antenna 1 Piece
5 220V Power cable 1 Piece