User's Manual
Table Of Contents
- 1. Preparation before Installation
- 2. Installation
- 3. Configuration
- 4. Software Functions
- 5. FAQ and Troubleshooting
Figure 2-2 Dual-light camera and blackbody assembly
Step 2: Dual-light camera and tripod assembly
Fix the tripod adapter to the camera, then fix the camera to tripod.
Step 3: Equipment connection
Figure 2-3 Video analysis host port description
1) Use network cable to connect visible light camera to LAN port of video analysis host.
2) Use network cable to connect computer to WAN port of video analysis host.
3) Use a HDMI cable to connect monitor to video analysis host.
4) Connect a mouse to the USB port of video analysis host.
5) Connect the data cable from video analysis host to type-C port of IR camera.
6) Connect the power cable of visible light camera.
7) Connect 220V power cable to video analysis host.
8) Connect Bluetooth antenna to video analysis host.
After all the cables are connected, power on the camera and video analysis host.