Getting Started Guide

Precautions
Do not point the projector at eyes, as it may cause injury.
Do not obstruct the air inlet/outlet. Otherwise, abnormal heat ventilation may cause
damage to the device.
Do not place the device in areas with excessively high or low temperatures. The
temperature of the operating environment should be -10°C to 40°C.
Use the device in a clean and dry environment. Avoid exposure to liquid splashes and rain,
as the device is not designed to be water-resistant.
Do not rinse the device using chemicals, detergents, or water. You can gently wipe the
device's surface with a dry cloth.
Do not squeeze the device with force or place heavy objects on the device, as this may
damage the device.
Do not throw, knock, or violently shake the device. Otherwise, damage may be caused to
the internal components.
Do not dry the device by putting it in heating equipment.
Do not dismantle the device without the authorization from Puppy Robotics.
Contact Customer Service [e-mail]