User's Manual

Routine maintenance

Omnidirectional wheel

*Clean as required

1. Turn the robot over.

2. Use a small screwdriver to pry out the axle and remove the

wheel.

3. Rinse the axle and the wheel with water to remove any hair and

dirt.

4. Dry and reinstall the wheel, then press it back in place.

Note:

The omnidirectional wheel bracket cannot be removed.

Wheel

Axle

Bracket

Restore factory settings

If the robot is not functioning after a system reset, turn it on, then

press the

button, and then press and hold the Reset button

until you hear the "Start restoring initial version" voice alert. The

robot will then be restored to factory settings.

System Reset

If the robot does not respond when you press a button or the

robot cannot be shut down, press the Reset button. The robot will

then restart.

Note:

After a system reset, cleaning schedules, WiFi and other settings will be restored to

factory settings.