User's Manual
Table Of Contents
- Main Features
- 2. PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Download Key into SL025
- 4-4-4. Login sector via stored key
- 4-4-5. Read a data block
- 4-4-6. Write a data block
- 4-4-7. Read a value block
- 4-4-8. Initialize a value block
- 4-4-9. Write master key (key A)
- 4-4-10. Increment value
- 4-4-11. Decrement value
- 4-4-12. Copy value
- 4-4-13. Read a data page (UltraLight & NTAG203)
- 4-4-14. Write a data Page (UltraLight & NTAG203)
- 4-4-15. Manage Red Led
- 4-4-16. Get firmware version
StrongLink SL025M
http://www.stronglink-rfid.com
12
Remark
[1]
In order to support 7 byte UID Mifare class, the firmware of SL025 has been
updated to Ver1.2 in Mar 2011.
And older firmware version (such as Ver1.0, 1.1) only supports 4 byte UID.
Please refer to NXP
Customer Letter UID for detailed information of 4 byte & 7 byte
UID of Mifare products.
[2]
To support NATG203, the firmware of SL025 has been updated to Ver1.6 in May
2012. The older firmware version only supports reading/writing data page address less
than 16.
[3]
One sample of SL025 response
Preamble
Len
Command
Status
Data
(Firmware version)
Checksum
HEX
BD
15
F0
00
53 4C 30 32 35 2D 33
2E 30 2D 32 30 31 36
31 31 31 34
69
ASCII
“SL025-3.0-20161114
”